Automotive Locksmith we are your source for free instructions on how to program your Chrysler keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Chrysler car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Here is the list of Chrysler Prowler Years and models this supports:
- 2001 Chrysler Prowler
- 2002 Chrysler Prowler
2001-2002 Chrysler Prowler Car Key Fob and Remote Programming Instructions:
ATTENTION: You MUST HAVE one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.
1. Using a working keyless remote, unlock the vehicle and disarm the Vehicle Theft/Security
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine).
3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).
5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. A chime will sound after each
additional remote is programmed.
6. Turn the ignition OFF and remove key.
7. Test Remotes.
If you have any questions or need a professional Locksmith To assist you with your Chrysler Prowler Key Fab Programming, below is a list of Low Rate Locksmith Locations.
Chrysler Prowler key fob programming service San Diego ca Chrysler Prowler key fob programming service fair oaks ca
Chrysler Prowler key fob programming service Stockton ca Chrysler Prowler key fob programming service Roseville ca
Chrysler Prowler key fob programming service Elk Grove ca Chrysler Prowler key fob programming service Rocklin ca
Chrysler Prowler key fob programming service Sacramento ca Chrysler Prowler key fob programming service Lincoln ca
Chrysler Prowler key fob programming service Carmichael ca Chrysler Prowler key fob programming service Folsom ca
Chrysler Prowler key fob programming service Citrus Heights ca Chrysler Prowler key fob programming service San Francisco ca
[uuuuuuu”10″ grid_id=”vc_gid:1527894025752-4d60673e-ac1a-10″ taxonomies=”4224″]
The Plymouth Prowler, later the Chrysler Prowler, is a “retro” styled production car built in 1997 and 1999-2002 by DaimlerChrysler. The Prowler was based on the 1993 concept car of the same name. One of the most striking design features of the Prowler are the open, Indy racer style front wheels. After the Plymouth marque was discontinued in 2001 the Prowler was sold as a Chrysler Prowler for the 2001 and 2002 model years.
Due to extremely limited trunk space, a $5,000 Prowler trailer option was available from Chrysler dealers. These trailers resembled the back end of a Prowler and had smaller versions of the five spoke wheels found on the car. They could be ordered to match a car’s factory color.