Here at Low Rate Locksmith we are your source for free instructions on how to program your Honda, keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Honda car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Here is the list of Honda CR-V Years and models this supports:
- 1997 Honda CR-V
- 1998 Honda CR-V
- 1999 Honda CR-V
- 2000 Honda CR-V
- 2001 Honda CR-V
- 2002 Honda CR-V
- 2003 Honda CR-V
- 2004 Honda CR-V
- 2005 Honda CR-V
- 2006 Honda CR-V
- 2007 Honda CR-V
- 2008 Honda CR-V
- 2009 Honda CR-V
- 2010 Honda CR-V
- 2011 Honda CR-V
- 2012 Honda CR-V
- 2013 Honda CR-V
1997-2006 Honda CR-V Car Key Fob and Remote Programming Instructions:
Entering the programming mode cancels all learned keyless remotes, so none of the
previously programmed remotes will work. You must reprogram all of the keyless
remotes once you are in the programming mode.
You must complete each step within 5 seconds of the previous step to keep the
system from exiting the programming mode.
1. Turn ignition switch to ON (II)
2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed
remote can be used for this step.)
3. Turn ignition switch to LOCK (0)
4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
in step 2
5. Turn the ignition switch to ON (II)
6. Press the LOCK or UNLOCK button the same remote. Make sure the power door
locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make
sure door locks cycle after you push each remote button to confirm system has
accepted the remote.
8. Turn the igniton switch to LOCK (0) to exit programming mode.
9. Test remote(s)
2007-2013 Honda CR-V Car Key Fob and Remote Programming Instructions:
A maximum of 4 key remote transmitters can be programmed.
Program remote or key when remote transmitter added, replaced or system malfunction.
There is no onboard programming procedure for 07-13 Honda CR-V. These vehicles requires special equipment be connected to the vehicle to program the keyless remote. Please contact your dealer or automotive locksmith.