Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Chevrolet keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Chevrolet car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Here is the list of Chevrolet Tracker Years and models this supports:
- 1999 Chevrolet Tracker
- 2000 Chevrolet Tracker
- 2001 Chevrolet Tracker
- 2002 Chevrolet Tracker
- 2003 Chevrolet Tracker
- 2004 Chevrolet Tracker
1999-2004 Chevrolet Tracker Car Key Fob and Remote Programming Instructions:
1. Locate the Data Link Port. It is located under dash drivers side. Be sure you know which pins are 8 and 4.
(Notice port is wider on top row)
2. Make sure there are metal contact pins in terminals 8 and 4. Connect 8 to 4 with a suitable
jumper wire (leave the jumper wire connected throughout the programming procedure). Make
sure you know which terminals are 8 and 4. The vehicle will respond by locking and unlocking the
doors to signify entering of programming mode.
3. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be
programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors.
Release the buttons on the transmitter.
4. Within one minute, repeat the previous step on the remaining transmitters to be programmed.
5. Remove jumper wire applied to the OBDIIPort.
The Chevrolet Tracker, formerly the Geo Tracker and introduced as a 1989 model, is a mini SUV produced for Chevrolet and Geo by CAMI Automotive in Ingersoll, Ontario. At that time, there was no need for keyless entry remote smart key fob programming instructions, as the keyless entry remote smart key fob option was not yet available. Although appearing as a compact SUV, the Chevrolet Tracker was actually certified as a Light truck due to its off-road capabilities. On January 27, 2004, production of the Chevrolet Tracker was discontinued at the CAMI plant in Ingersoll, Ontario and replaced with the Chevrolet Equinox. Although the Chevrolet Tracker is no longer being produced, we still continue provide the keyless entry remote fob smart key programming instructions.