Here at Low Rate Locksmith we are your source for free instructions on how to program your Mazda, keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Mazda car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Here is the list of Mazda Millenia Years and models this supports:
- 1995 Mazda Millenia
- 1996 Mazda Millenia
- 1997 Mazda Millenia
- 1998 Mazda Millenia
- 1999 Mazda Millenia
- 2000 Mazda Millenia
- 2001 Mazda Millenia
- 2002 Mazda Millenia
1995-2000 Mazda Millenia Car Key Fob and Remote Programming Instructions:
1. Remove key from ignition.
2. Close all doors.
3. Open driver side door and leave open.
4. Insert key in ignition, Turn key to ON (as far as you can go without starting the engine) and OFF, Remove Key.
5. Repeat step 4 two more times, making sure you remove key each time.
6. Close and then open the driver’s door three times.
7. Buzz sound or chime should be heard at this point signaling that the vehicle is now in programming mode. If not,
wait 40 seconds and return to step 1.
8. All transmitters need to be programmed at this time, including the old ones. Push any button on a transmitter two
times. A buzz sound to chime should be heard at this point signaling that the vehicle has accepted the new
transmitter code. Repeat for next transmitter, up to a total of three remotes (including any old remotes).
9. After all remotes are programmed, wait 15 seconds or until you hear four chimes signaling successful
2001-2002 Mazda Millenia Car Key Fob and Remote Programming Instructions:
- Remove key from ignition.
- Close all doors.
- Open driver side door and leave open.
- Perform the following steps within 24 seconds.
a. Insert key in ignition.
b. Turn key to ON and OFF.
c. Repeat step b two more times.
d. Remove key.
e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.)Ã‚Â
5. Buzz sound, chime or doors will lock and unlock should be heard at this point signaling that the vehicle is now in
programming mode. If not, wait 40 seconds and return to step 4.
6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmitter
two times. A buzz sound, chime or doors locking and unlocking should be heard at this point signaling that the
vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times
using the only transmitter. If there are two transmitters, repeat this step two more times using the second
7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 times should
be heard at this point signaling successful programming.
The Mazda Millenia was originally planned as the smaller of two luxury cars for Mazda’s luxury brand, Amati. As Mazda’s dwindling finances no longer permitted the launch of the Amati brand, the Millenia was launched in the autumn of 1993 in Europe (as the Xedos9) and Japan (as the Eunos 800) under the Mazda brand. The car was launched in the US in 1995 as the Millenia, and replaced the 929 as Mazda’s flagship sedan. The Millenia was dropped after 2002, because of slow sales, and was replaced by the Mazda6 (which became the new flagship Mazda) for 2003.