Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Nissan keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Nissan car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Here is the list of Nissan 350Z Years and models this supports:
- 2003 Nissan 350Z
- 2004 Nissan 350Z
- 2005 Nissan 350Z
- 2006 Nissan 350Z
- 2007 Nissan 350Z
- 2008 Nissan 350Z
2003-2008 Nissan 350Z Car Key Fob and Remote Programming Instructions:
1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert key into ignition and remove it from the ignition key cylinder at least six times
within 10 seconds. Your Hazard Lamps will flash if you have performed this step
successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this
procedure is performed too fast, system will not enter programming mode.
3. Insert key into the ignition cylinder and turn to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
flash. NOTE: Do not press the button more than one time in the above step. If the button
is pressed more than one time, the programming procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors
using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button
on the next remote. Your Hazard Lamps should flash. Repeat this step for each
transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the
driver’s side power lock/unlock switch and open the driver side door.
If you have any questions or need a professional Locksmith To assist you with your Nissan 350Z Key Fab Programming, below is a list of Low Rate Locksmith Locations.
Nissan 350Z key fob programming service San Diego ca Nissan 350Z key fob programming service fair oaks ca
Nissan 350Z key fob programming service Stockton ca Nissan 350Z key fob programming service Roseville ca
Nissan 350Z key fob programming service Elk Grove ca Nissan 350Z key fob programming service Rocklin ca
Nissan 350Z key fob programming service Sacramento ca Nissan 350Z key fob programming service Lincoln ca
Nissan 350Z key fob programming service Carmichael ca Nissan 350Z key fob programming service Folsom ca
Nissan 350Z key fob programming service Citrus Heights ca Nissan 350Z key fob programming service San Francisco ca
[uuuuuuu”10″ grid_id=”vc_gid:1527040107874-5212f0d3-8ca4-9″ taxonomies=”4224″]
The Nissan 350Z (known as Nissan Fairlady Z Z33 in Japan) is a two seat sports car that was manufactured by Nissan from 2002 to 2009 and marks the fifth generation (codename: Z33) of Nissan’s Z-car line. The 350Z entered production in late 2002 and was sold and marketed as a 2003 model. The first year there was only a coupe, as the roadster did not debut until the following year.
The 350Z has received numerous awards, including Japanese Performance Car of the Year 2007 by TopSpeed Magazine, 10 Best Cars 2003 by Car and Driver, Most Significant Vehicle of the Year Two years running by Edmunds.com, and Editors’ Most Wanted 2003 by Edmunds.com.