Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Nissan keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Nissan car keys or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

Here is the list of Nissan Maxima Years and models this supports:

 

  • 1995 Nissan Maxima
  • 1996 Nissan Maxima
  • 1997 Nissan Maxima
  • 1998 Nissan Maxima
  • 1999 Nissan Maxima
  • 2000 Nissan Maxima
  • 2001 Nissan Maxima
  • 2002 Nissan Maxima
  • 2003 Nissan Maxima

 

  • 2004 Nissan Maxima
  • 2005 Nissan Maxima
  • 2006 Nissan Maxima
  • 2007 Nissan Maxima
  • 2008 Nissan Maxima
  • 2009 Nissan Maxima
  • 2010 Nissan Maxima

 

1995 Nissan Maxima Fob and Remote Programming Instructions:

1. Close and lock all doors with the driver’s side power lock/unlock
switch.

2. Insert key into ignition and remove it from the ignition key cylinder
at least six times within 10 seconds. Your Hazard Lamps will flash
if you have performed this step successfully. ( Withdraw key
completely from ignition cylinder each time ) . If this procedure is
performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push LOCK button on the keyless remote. Your
Hazard Lamps should flash. ( Do not press the button more than
one time in the above step). If the button is pressed more than one
time, the programming procedure will not be successful.

5. If there are any remaining remotes (including the old ones), unlock
then lock all doors using the driver’s side power lock/unlock switch
and within 5 seconds, push LOCK button on the next remote. Your
Hazard Lamps should flash. Repeat this step for each keyless remote
(including any existing keyless remotes).

6. Turn the key to the OFF position, remove keys from the ignition,
Open door, Test Remotes

1996-1999 Nissan Maxima Fob and Remote Programming Instructions:

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds.
Your Hazard Lamps will flash if you have performed this step successfully. ( Withdraw key completely from
ignition cylinder each time ) . If this procedure is performed too fast, system will not enter programming
mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push LOCK button on the keyless remote. Your Hazard Lamps should flash. ( Do not press
the button more than one time in the above step). If the button is pressed more than one time, the
programming procedure will not be successful.

5. If there are any remaining remotes (including the old ones), unlock then lock all doors using the driver’s
side power lock/unlock switch and within 5 seconds, push LOCK button on the next remote. Your Hazard
Lamps should flash. Repeat this step for each keyless remote (including any existing keyless remotes).

6. Turn the key to the OFF position, remove keys from the ignition, Open door, Test Remotes

2000-2006 Nissan Maxima Fob and Remote Programming Instructions:

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

2007-2010 Nissan Maxima Fob and Remote Programming Instructions:

There is no manual way to program keyless remotes for Nissan Maxima 2007-2010. Please contact a Locksmith or your local dealership to get a quote on how much it will cost to program keyless remotes to this vehicle.

The Nissan Maxima is an entry-level luxury car manufactured by Nissan, marketed as the “four-door sports car”. The origins of the Maxima began in July 1976 as the Datsun 810, an upscale six-cylinder version of the Bluebird, and was spun into its own line in 1981, having been made continuously since then. The “Maxima” name was applied gradually, beginning in 1981. Most pre-2004 Maxima’s were built in Oppama, Japan, until the current North American Maximas started being assembled in Smyrna, Tennessee.

NHTSA rated the sixth generation Nissan Maximas a 5 out of 5 star rating for Driver Front-Impactand 4 out of 5 star rating for Passenger Front-Impact. The sixth generation Maxima also recieved 4 out of 5 star rating for Front and Rear Side-Impact and Rollover, as wel

5/5 - (14 votes)