An integral question to ask yourself when having problems with your lock is whether you need to change it entirely or the lock cylinder only.
This is because most of the time these locks do not need to be replaced but the key, on the other hand, may need replacement. However, if you want to have an entirely different lock or if an important part of the lock is spoilt. This is why a locksmith is supposed to present these cases to their clients.
Re-keying the lock is essentially cheaper than replacing the lock and it improves the quality of the lock. At United Locksmith, we provide these services which save you loads of money.
What amount of time does it take to re-key a lock?
This depends on the type of lock to be re-keyed. With the aid of an experienced locksmith, it can take an average of just a few minutes. Getting that lockout of the door so as to change the cylinder is the only thing that takes up more time than the rest of the process. This is because all the locks are unique. The locksmith can estimate the time they will take on examining the lock.
Is it advisable to attempt to change the cylinder on your own?
It can be very easy for an experienced locksmith especially if one happens to be aware of how the system of the lock works. However, if you make a mistake the lock can end up being destroyed and this could lead to more loss of the money you were trying to save.
This is why we provide locksmiths available to the general public at United Locksmith who will do it for you without destroying the locks.
You might ask if it is necessary to re-key locks to a recently acquired house.
It is important to re-key your locks after moving into your new house. Although most owners think the locksmith just wants to take their money or have even been in a situation where they scammed them, it is just a precautionary measure for extra security.
In the new house, you would not know how many people have copies of the keys to your locks before you acquired the house. There could also be the possibility of the lock being master keyed if it is new or even having experienced entire reconstruction.
This makes the lock lose control of the keys used to open the said lock. The locksmith can easily remove the master key pins that were left in the locks thus making the house more secure.
How do you re-key a lock?
This practice is not hard, especially for experienced locksmiths. It is where a lock is adjusted but still functions but increasing the security in your home because you get to use a new key on the same lock. It is a method a homeowner should take advantage of since it is not so expensive.
Between re-keying a lock and changing it, it is better to re-key the lock. This is because it allows you to keep parts of the lock but only use a new key on the lock. When you have the basic understanding of the lock system especially the tumbler pin lock you can re-key a lock.
Most people want to have a singular key for their locks and that is why they re-key their locks.
In order to complete the task at hand, the locksmith has to examine the lock to be re-keyed, the old key and the key to be used later on after re-keying. This will help them estimate the time to be taken to re-key the lock you present to them.
Taking the lock off of the door is the act that takes longer because of the difference in the locks so some are faster than others. This is why if you have a deadbolt lock it could be easier to remove it and to replace or re-install it.
This is because you just need to unscrew it from the door and separate the sides. You then take off the screws attached to the bolts on the door. Doorknob locks are harder to re-key.
To re-key such locks you need to use a spanner and a catching tool to remove the lock. The catching tool is to help pry the knob off the door. Before this is done you need to to make sure they are not held down by any screws.
Ensure the screws are off and then pry the knob off the lock, you do this until the hole in the knob is visible by rotating it. Insert the tool into the hole in the knob. This causes the knob to pop loose and making it easy to remove it. After this, the locksmith uses the spanner to take off the shank enabling you to access the cylinder of the lock.
On gaining access to the cylinder the locksmith removes the ring of the cylinder retainer and keeps it safe. Insert the key currently in use and turn it ninety degrees so that it opens and slides off the plug.
You then use a follower to push the plug. This ensures the springs and pins engaged stay in place even after the key is turned. It works as a placeholder while re-keying the lock.
A key decoder is then used to find the pin easily to groove.it helps choose the right pin to insert in the plug.
It acts as a chart that helps the locksmith find the appropriate size for the new key-pins thus re-keying the lock. You need to measure the grooves of the new key by inserting the new key into the decoder.
When you are done measuring then gather the necessary pins for the new key and fit them into the plug. Verifying the pins is simple since if they are not the right size they are flushed against the cylinder. On verifying the right pins are used, they are inserted into the bible.
This is to be done with extreme caution with gentle pressure being applied to ensure the plug is inserted while the follower is being removed from the cylinder. It is done at 90 degrees just like while removing it. After re-installing the plug the retainer ring is reattached then the lock is put back together as good as if it were new.
Re-keying locks increase the sense of security in the3 house without incurring lots of costs. It also gives you sole key control of your property.
Master key systems have different levels of access. This depends on the key one has.
A professional locksmith helps with this and can fix it for you very easily. This is why you should leave it