What year ranges does this Ford Fiesta Key Fob guide cover?

This guide covers only these year clusters: 2011u20132013, 2014u20132016 & 2019, and 2018.

Does this Ford Fiesta Key Fob guide program the remote only or also the anti-theft key?

Coverage depends on the year cluster and system type. The guide includes onboard remote programming steps where listed and anti-theft key programming steps only where the source indicates it is possible with prerequisites such as having two programmed keys.

What if the Ford Fiesta Key Fob steps do not work?

Re-check prerequisites and timing windows. For the 2014u20132016 & 2019 cluster, the source-backed guidance is to wait 10 seconds and repeat the procedure. Battery replacement is also a source-supported troubleshooting step for a nonworking remote.

When should DIY attempts stop and professional programming begin for a Ford Fiesta Key Fob?

Professional programming is appropriate when the vehicle uses a smart key system that is not onboard programmable in this guide, when fewer than two programmed keys are available for procedures that require two, or when key creation plus programming is required to meet prerequisites.

Can a replacement key or fob still need programming for a Ford Fiesta Key Fob?

Yes. Replacement keys or remotes typically still need pairing to the vehicle through eligible onboard steps (when available for the year cluster and system type) or through professional equipment for smart key systems.

Ford Fiesta Key Fob Programming by Year

Can you program a Fiesta fob without the dealer? For most years, yes. Pick your year for the route and best next step.

☎ Call (833) 439-8636

Find your year

Year	DIY onboard?	How it programs	Working fob?	Erase risk	Confidence	Best next step
2011–2013	Yes	Yes - onboard relearn	Yes (2 working)	Possible	Med	Follow the steps below
2014–2016, 2019	Yes	Yes - onboard relearn	—	Possible	Med	Follow the steps below
2018	Confirm	Confirm with us	Yes (2 working)	Possible	Med	Call to confirm your trim

Ford Fiesta key types & programming facts

USA/Canada Ford Fiesta models in this range use either a remote-head key or a PEPS smart key that combines an immobilizer transponder with remote locking functions. Programming normally requires an existing working key or access to specialized diagnostic equipment; many models allow onboard remote programming but immobilizer pairing is typically completed with a locksmith or dealer scan tool. Replacement keys and remotes must be correctly matched to the vehicle’s year, trim, and key system type to function for both starting and remote locking.

Key types used on the Fiesta:

remote-head key (fixed key blade with built‑in remote buttons) (2011-2019)
PEPS smart/proximity key (push‑to‑start with emergency mechanical key) (2011-2019 (where equipped))

2011–2013 Ford Fiesta

Route verified — exact steps vary by trim/equipment

Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.

Show the programming methods (12 steps)

Securilock (Passive Anti-Theft) Key Programming Steps

Programming step

1 Requirement: two previously programmed keys plus new unprogrammed key accessible

Insert the key

2 Insert first programmed key, turn ignition off→run, hold in run ~3 seconds, turn off and remove

Insert the key

3 Within 10 seconds insert second programmed key, repeat off→run hold ~3 seconds, turn off and remove

Insert the key

4 Within 10 seconds insert new unprogrammed key, off→run hold ~3 seconds to program; repeat sequence to program up to 8 keys

Programming step

5 Note: Locksmith needed if fewer than two previously programmed keys available

Remote Keyless Entry Programming Steps

Programming step

1 Warning: programming deletes previous transmitter programming; all desired transmitters must be programmed in the same session

Cycle the ignition ON/OFF

2 Turn ignition off→run four times in rapid succession (within 6 seconds), ending in off; chime indicates program mode entered

Press / hold a fob button

3 Within 10 seconds press any button on transmitter to be programmed; chime confirms programming

Exiting Programming and Timing Notes

Programming step

1 Programming mode exits automatically if ignition turned to run

Wait / timing window

2 Programming mode also exits after 10 seconds of inactivity since entering mode or last transmitter programmed

Wait / timing window

3 Programming sequence ends if no action taken within 10 seconds after a transmitter has been programmed

Doors lock-cycle (confirm)

4 No chime or other confirmation provided upon exiting programming mode

Keys & fobs that fit the 2011–2013 Fiesta

Ford Remote Head KeyRemote KeyView fob →Ford Remote Head KeyRemote KeyView fob →

For the 2011–2013 Fiesta: Fiesta key replacement & all compatible fobs →

2014–2016, 2019 Ford Fiesta

Route verified — exact steps vary by trim/equipment

Show the programming methods (20 steps)

Preparation

Programming step

1 Applicable to 2014 Ford Fiesta keyless entry remote fob and smart key systems

Programming step

2 Requirement: two previously programmed keys plus the new unprogrammed key for remote/key combo system

Wait / timing window

3 If fewer than two programmed keys, locksmith needed to cut and program second key

Programming step

4 Read and understand entire procedure before beginning

Programming step

5 Smart key system: vehicle not onboard programmable; qualified professional required

Programming: Remote/Key Combo System

Insert the key

1 Insert first previously programmed key into ignition

Cycle the ignition ON/OFF

2 Switch ignition off→on; keep on at least 3 seconds, no more than 10 seconds

Remove the key

3 Switch ignition off and remove first programmed key

Insert the key

4 Within 3–10 seconds after switching off, insert second previously programmed key

Cycle the ignition ON/OFF

5 Switch ignition off→on with second key; keep on 3–10 seconds, then switch off and remove

Programming: Completing Remote/Key Combo

Insert the key

1 After 3–10 seconds of removing second key, insert new unprogrammed key into ignition

Cycle the ignition ON/OFF

2 Switch ignition off→on with new key and keep on for at least 6 seconds

Remove the key

3 Remove newly programmed key from ignition after timing requirement

Programming step

4 Successful programming indicated by ability to start engine and operate remote entry system

Wait / timing window

5 If unsuccessful, wait 10 seconds and repeat Steps 1 through 8

Smart Key System Procedure

Programming step

1 Vehicle is not onboard programmable; requires qualified professional to program smart key remote fobs

Programming step

2 Locate an automotive locksmith using Low Rate Locksmith

Programming step

3 Driving vehicle to locksmith may save money compared to locksmith travel

Programming step

4 Locksmith will hook up specialized computer equipment to the vehicle to program smart key remote fob

Programming step

5 Smart key programming cannot be completed using the remote/key combo onboard steps

Keys & fobs that fit the 2014–2016, 2019 Fiesta

Ford Remote Head KeyRemote KeyView fob →Ford Remote Head KeyRemote KeyView fob →

For the 2014–2016, 2019 Fiesta: Fiesta key replacement & all compatible fobs →

2018 Ford Fiesta

Professional programming required

Professional programming for the 2018

Programming for this exact year/trim is confirmed case-by-case. A mobile locksmith confirms your key type and FCC ID, then programs it on site.

Call (833) 439-8636

Keys & fobs that fit the 2018 Fiesta

Ford Remote Head KeyRemote KeyView fob →Ford Remote Head KeyRemote KeyView fob →

For the 2018 Fiesta: Fiesta key replacement & all compatible fobs →

How we validate this guide

Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.

Year	Route status	Exact steps
2011–2013	Route verified	General guidance
2014–2016, 2019	Route verified	General guidance
2018	Needs confirmation	Professional route

Common questions

Does my 2011-2019 Ford Fiesta use a chip key or just a remote?

All 2011-2019 Ford Fiesta keys sold as OEM-style replacements combine an immobilizer transponder with remote lock/unlock functions, either in a remote-head key or a smart key fob.

Can I program a new Ford Fiesta key fob myself?

Some 2011-2019 Fiesta remotes can be programmed onboard, but pairing a new transponder or smart key to start the car generally requires professional diagnostic equipment or two existing working keys.

What battery does the 2011-2019 Ford Fiesta key fob use?

Common OEM-style 2011-2019 Ford Fiesta remote and smart key fobs use a CR2032 coin-cell battery, as shown in multiple Fiesta-specific battery replacement guides.

Can you program a Fiesta key fob without going to the dealership?

For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.

Does this program the remote only, or the transponder key too?

It depends on your key type. Tell us your FCC ID and we will confirm.

What if my year says professional programming required?

Those years need a programmer or security access; we bring the tool to you and program it on site.

How much does it cost?

It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.

Need your Fiesta fob programmed? We come to you, 24/7.

Call (833) 439-8636 Get a quote