What year ranges does this Infiniti I30 Key Fob guide cover?

This Infiniti I30 Key Fob procedure applies to the 2000 and 2001 model years only, using an in-vehicle programming mode with hazard-lamp confirmations.

Does this procedure program the remote only, or also the transponder?

This page covers remote-transmitter programming for keyless-entry functions. Engine-start authorization and immobilizer-related programming are not addressed by this Infiniti I30 Key Fob procedure.

What if the Infiniti I30 Key Fob steps do not work?

If hazard lamps do not flash at the confirmation checkpoints, restart the procedure and focus on the 10-second and 5-second timing windows and the single-press rule. If the remote remains nonfunctional, battery replacement and then remote replacement are the next source-bounded paths.

When should DIY attempts stop and professional help begin for an Infiniti I30 Key Fob?

Professional help is appropriate when multiple careful attempts do not produce hazard-lamp confirmations, when timing constraints cannot be met consistently, or when the remote remains nonfunctional after battery replacement.

Infiniti I30 Key Fob Programming by Year

Can you program a I30 fob without the dealer? For most years, yes. Pick your year for the route and best next step.

☎ Call (833) 439-8636

Find your year

Year	DIY onboard?	How it programs	Working fob?	Erase risk	Confidence	Best next step
2000	Yes	Yes - onboard relearn	No (all-keys-lost OK)	Yes	Med	Follow the steps below
2001	Yes	Yes - onboard relearn	No (all-keys-lost OK)	Possible	High	Follow the steps below

Infiniti I30 key types & programming facts

2000–2001 Infiniti I30 models use a transponder ignition key plus a separate keyless-entry remote. The remote can be added or replaced by using an onboard programming sequence with an existing working key. The transponder key itself typically requires programming with specialized diagnostic equipment or locksmith tools so the immobilizer will recognize the new chip.

Key types used on the I30:

transponder chip key (separate metal key plus separate keyless-entry remote) (2000-2001)

Common fob FCC IDs: KBRASTU10 — check the back of your fob; we confirm the exact variant on site.

2000 Infiniti I30

Route verified — exact steps vary by trim/equipment

Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.

Show the programming methods (25 steps)

Preparation

Close the doors

1 Close and lock all doors with the driver side power lock/unlock switch.

Programming step

2 Ensure all existing transmitters (old remotes) are available if reprogramming multiple devices.

Programming step

3 Have the vehicle key ready for repeated insertion and removal.

Doors lock-cycle (confirm)

4 Expect hazard lamps to flash as confirmation during steps.

Wait / timing window

5 Note timing constraints for several steps (e.g., within 10 seconds, within 5 seconds).

Entering Programming Mode

Insert the key

1 Insert key into ignition and remove it from the ignition cylinder at least six times within 10 seconds.

Programming step

2 Withdraw key completely from ignition cylinder for each insertion/removal.

Programming step

3 Hazard lamps will flash if the six-times step performed successfully.

Programming step

4 Avoid performing the insertion/removal step too fast to prevent failing to enter programming mode.

Insert the key

5 After the six-times step, insert key into the ignition cylinder and turn to the ACC position.

Programming Each Remote

Wait / timing window

1 Within 5 seconds of turning key to ACC, push ANY button on the remote transmitter.

Doors lock-cycle (confirm)

2 Hazard lamps should flash to confirm successful programming of that remote.

Press / hold a fob button

3 Do not press the remote button more than once in the confirming step.

Programming step

4 If the button pressed more than once, the programming procedure will not be successful.

Programming step

5 Repeat the programming step for each additional transmitter.

Adding Remaining Transmitters

Press LOCK + UNLOCK

1 For any remaining transmitters (including old ones), unlock then lock all doors using the driver side power lock/unlock switch.

Wait / timing window

2 Within 5 seconds of locking, push ANY button on the next remote transmitter.

Doors lock-cycle (confirm)

3 Hazard lamps should flash to confirm programming of each additional transmitter.

Press LOCK + UNLOCK

4 Repeat unlock/lock then button-press sequence for each transmitter (including any existing transmitters).

Programming step

5 Ensure timing is observed for each transmitter programming attempt.

Exiting Programming and Final Steps

Turn ignition to ON

1 Turn the key to the OFF position.

Remove the key

2 Remove keys from the ignition.

Press LOCK + UNLOCK

3 Unlock doors using the driver side power lock/unlock switch.

Programming step

4 Open the driver side door.

Programming step

5 Reference provided links for battery replacement or key fob replacement if issues persist (e.g., "Key Fob Not Working? Have You Tried Replacing the Battery?", "Need To Replace Your Key Fob?").

Keys & fobs that fit the 2000 I30

Nissan/Infiniti OEM Remote Key FobRemoteView fob →

For the 2000 I30: I30 key replacement & all compatible fobs →

2001 Infiniti I30

Route verified — exact steps vary by trim/equipment

Show the programming methods (18 steps)

Preparation steps

Close the doors

1 Close and lock all doors with the drivers side power lock/unlock switch

Programming step

2 Ensure key available for repeated insertion and withdrawal from ignition cylinder

Doors lock-cycle (confirm)

3 Confirm hazard lamps will flash to indicate successful entry into programming steps

Wait / timing window

4 Note timing sensitivity: actions must occur within specified seconds to enter programming mode

Programming step

5 Warning: withdrawing key completely from ignition cylinder each time required

Entering programming mode

Remove the key

1 Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds

Programming step

2 Hazard lamps flash if the six-times removal step performed successfully

Programming step

3 Caution: performing the six-times step too fast prevents system from entering programming mode

Insert the key

4 After six removals, insert key into ignition cylinder and turn to the ACC position

Wait / timing window

5 Timing requirement: subsequent remote action must occur within 5 seconds

Programming transmitters

Wait / timing window

1 Within 5 seconds of turning key to ACC, push ANY button on the remote transmitter

Doors lock-cycle (confirm)

2 Hazard lamps should flash to confirm successful programming of that transmitter

Press / hold a fob button

3 Do not press the button more than one time during the single-transmitter step

Press LOCK + UNLOCK

4 For additional transmitters, unlock then lock all doors using drivers side power lock/unlock switch

Wait / timing window

5 Within 5 seconds of locking, push ANY button on the next remote; repeat for each transmitter (including existing ones)

Exiting and troubleshooting

Remove the key

1 Turn the key to the OFF position and remove keys from the ignition to finish

Press LOCK + UNLOCK

2 Unlock doors using the drivers side power lock/unlock switch and open the driver side door

Programming step

3 Reminder: no new transmitters programmed if previous steps performed too quickly or buttons pressed more than instructed

Keys & fobs that fit the 2001 I30

Nissan/Infiniti OEM Remote Key FobRemoteView fob →

For the 2001 I30: I30 key replacement & all compatible fobs →

How we validate this guide

Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.

Year	Route status	Exact steps
2000	Route verified	General guidance
2001	Route verified	General guidance

Common questions

Does my 2000–2001 Infiniti I30 use a chip key?

Yes. Suppliers list 2000–2001 Infiniti I30 keys as transponder chip keys, usually sold as a metal key plus a separate remote fob.

Can I program a replacement remote for my Infiniti I30 myself?

Yes. Multiple sources show 1996–2001 Infiniti I30 remotes can be programmed by an onboard procedure using the ignition key and the power door locks.

What remote FCC ID is commonly used on the 2000–2001 Infiniti I30?

A keyless entry video and supplier for the 2000–2001 Infiniti I30 show a remote with FCC ID KBRASTU10 used on these models.

Can you program a I30 key fob without going to the dealership?

For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.

Does this program the remote only, or the transponder key too?

It depends on your key type. Tell us your FCC ID and we will confirm.

What if my year says professional programming required?

Those years need a programmer or security access; we bring the tool to you and program it on site.

How much does it cost?

It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.

Need your I30 fob programmed? We come to you, 24/7.

Call (833) 439-8636 Get a quote