Chrysler Aspen Key Fob Programming by Year
Can you program a Aspen fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2007–2009 | Yes | Yes - onboard relearn | — | — | High | Follow the steps below |
Chrysler Aspen key types & programming facts
For the 2007-2009 Chrysler Aspen, sources describe a standard ignition key with transponder functionality and a separate keyless-entry remote/fob, with programming possible onboard using an already programmed key. Sources also indicate these remotes are not for proximity/push-button systems, so the Aspen in this range uses conventional key-and-ignition programming rather than smart-key pairing.
Key types used on the Aspen:
- transponder key (2007-2009)
- remote key fob / keyless entry remote (2007-2009)
Common fob FCC IDs: OHT692427AA, Y164-PT, Y164PT, Y164 — check the back of your fob; we confirm the exact variant on site.
2007–2009 Chrysler Aspen
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (16 steps)
Sentry Key Programming Requirements
Step-by-Step Programming Procedure
Troubleshooting & Alternatives
Site Navigation & Legal
For the 2007–2009 Aspen: Aspen key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2007–2009 | Route verified | General guidance |
Common questions
Does the 2007-2009 Chrysler Aspen use a smart key or push-button start fob?
No. Source listings for Aspen remotes explicitly say they are not compatible with proximity, KeylessGO, or push-button ignition systems.
Can the Chrysler Aspen remote be programmed onboard?
Yes. Sources describe onboard programming using an already programmed key and ignition-based steps.
Which FCC IDs are commonly listed for the Chrysler Aspen remote?
Commonly listed FCC IDs include OHT692427AA and Y164-PT / Y164PT / Y164.
Can you program a Aspen key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.