Chrysler Concorde Key Fob Programming by Year
Can you program a Concorde fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2000 | Yes | Yes - onboard relearn | Yes (1 working) | Possible | Med | Follow the steps below |
| 2001–2004 | Yes | Yes - onboard relearn | Yes (1 working) | None known | High | Follow the steps below |
Chrysler Concorde key types & programming facts
The provided sources support that the Chrysler Concorde used a keyless entry remote fob in this era, and programming instructions for the 2004 model indicate an onboard programming route for the remote. The sources do not provide model-specific evidence for transponder-chip or ignition-key programming details, so those key types remain unconfirmed here.
Key types used on the Concorde:
- keyless entry remote fob (2000-2004)
- transponder key (unknown from provided sources)
- remote-head key (unknown from provided sources)
- flip key (not supported by provided sources)
- smart/proximity push-to-start (not supported by provided sources)
2000 Chrysler Concorde
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (8 steps)
Vehicle & Requirement
Programming Confirmation & Completion
For the 2000 Concorde: Concorde key replacement & all compatible fobs →
2001–2004 Chrysler Concorde
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (15 steps)
Initial Remote Resynchronization & Ignition Steps
Entering Programming Mode
Programming New/Replacement Remotes
For the 2001–2004 Concorde: Concorde key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2000 | Route verified | General guidance |
| 2001–2004 | Route verified | General guidance |
Common questions
Does a 2004 Chrysler Concorde remote need special equipment to program?
The listed programming source says the remote uses an onboard programming procedure, not a scan-tool procedure, for the 2004 Concorde.
What kind of fob does the Chrysler Concorde use?
The provided sources identify it as a keyless entry remote fob for the Concorde.
Are FCC IDs available for this model from the provided sources?
No FCC ID is stated in the provided sources, so none are listed here.
Can you program a Concorde key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.