Dodge Durango Key Fob Programming by Year
Can you program a Durango fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2000 | Yes | Yes - onboard relearn | Yes (1 working) | Possible | Med | Follow the steps below |
| 2001–2003 | Yes | Yes - onboard relearn | Yes (1 working) | Yes | High | Follow the steps below |
| 2004–2006 | Yes | Yes - onboard relearn | Yes (1 working) | Yes | Med | Follow the steps below |
| 2007–2009 | Yes | Yes - onboard relearn | Yes (2 working) | Possible | Med | Follow the steps below |
Dodge Durango key types & programming facts
For a 2000 Dodge Durango, the keyless entry system uses a separate three-button remote fob identified by FCC ID GQ43VT9T; the metal ignition key itself has no remote buttons. Programming additional remotes for 2000 models can be done onboard if at least one working remote is available, using an ignition-on sequence and button presses to enter programming mode. Later 2001–2009 Durango models continue to use conventional metal keys with separate keyless-entry remotes, but specific FCC IDs and chip types are not clearly documented in the available sources.
Key types used on the Durango:
- non-transponder metal key with separate keyless-entry remote (2000)
- transponder chip key with separate keyless-entry remote (2001-2009 (inferred from era; no Durango-specific transponder source found, so years not confirmed in sources and should be treated as approximate/uncertain))
Common fob FCC IDs: GQ43VT9T — check the back of your fob; we confirm the exact variant on site.
2000 Dodge Durango
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (23 steps)
Vehicle & Service Info
Programming Requirements
Ignition & Mode Entry Steps
Remote Programming Sequence
Completion & Testing
For the 2000 Durango: Durango key replacement & all compatible fobs →
2001–2003 Dodge Durango
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (20 steps)
Preparation Steps
Programming Sequence Entry
Programming Additional Remotes
Troubleshooting and Related Info
For the 2001–2003 Durango: Durango key replacement & all compatible fobs →
2004–2006 Dodge Durango
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (19 steps)
Procedure #1 — Remote/Key without Transponder
Procedure #2 — Remote/Key with Transponder
Testing, Finishing Steps & Notes
Troubleshooting, Parts & Additional Services
For the 2004–2006 Durango: Durango key replacement & all compatible fobs →
2007–2009 Dodge Durango
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (10 steps)
Vehicle applicability and prerequisites
Detailed timing and actions
For the 2007–2009 Durango: Durango key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2000 | Route verified | General guidance |
| 2001–2003 | Route verified | General guidance |
| 2004–2006 | Route verified | General guidance |
| 2007–2009 | Route verified | General guidance |
Common questions
What kind of key and remote does a 2000 Dodge Durango use?
A separate three-button keyless-entry remote (lock, unlock, panic) with FCC ID GQ43VT9T, plus a standard metal ignition key without buttons.
Can I program a replacement remote for my 2000 Dodge Durango myself?
Yes. If you have at least one working remote, the 2000 Durango supports onboard programming using an ignition-on sequence and specific button presses.
Does the 2000 Dodge Durango use a smart key or push-button start system?
No. It uses a traditional metal key for the ignition and a separate keyless-entry remote; no proximity or push-to-start system is listed for this model year.
Can you program a Durango key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.