What year ranges does this guide cover?

This Dodge Grand Caravan Key Fob guide is limited to three year clusters: 2003, 2004u20132007, and 2008u20132009.

Does this guide program the remote only, or also an immobilizer key?

The covered procedures vary by year range. The 2003 steps are presented as a keyless-entry remote procedure. The 2004u20132007 steps reference a remote/key sequence with a required cut key. The 2008u20132009 steps cover an integrated key Fobik procedure with Vehicle Security Light confirmation.

What if the steps do not work?

If confirmation cues do not appear, stop and re-check prerequisites and timing windows. If the required number of already-working remotes or keys is not present, professional programming is typically required.

When should DIY be skipped in favor of professional programming?

DIY should be skipped when prerequisites are not met: no working remote for 2003, fewer than two working programmed remotes/keys for 2004u20132007, or fewer than two valid key devices for 2008u20132009.

Can a replacement fob still require programming?

Yes. A replacement device commonly requires programming to the vehicle. This guide helps identify whether self-programming is supported for the year range or whether professional programming is required.

Dodge Grand Caravan Key Fob Programming by Year

Can you program a Grand Caravan fob without the dealer? For most years, yes. Pick your year for the route and best next step.

☎ Call (833) 439-8636

Find your year

Year	DIY onboard?	How it programs	Working fob?	Erase risk	Confidence	Best next step
2003	Yes	Yes - onboard relearn	—	—	High	Follow the steps below
2004–2007	Yes	Yes - onboard relearn	—	—	High	Follow the steps below
2008–2009	Yes	Yes - onboard relearn	Yes (2 working)	None known	High	Follow the steps below

Dodge Grand Caravan key types & programming facts

From 2003–2009, US/Canadian Dodge Grand Caravan models use immobilizer-equipped keys that must be electronically programmed to the vehicle in addition to being cut correctly. Mechanical-only cutting will not start the vehicle on transponder, remote-head, or Fobik systems, so a locksmith or dealer must add the key to the van’s security system using approved diagnostic or onboard procedures. Existing working keys/remotes can sometimes be used to self-program additional remotes, but full key programming generally requires specialized tools and proof of ownership.

Key types used on the Grand Caravan:

transponder chip key (Y160) with separate remote (2003)
remote-head key (integrated key + remote) (2004-2007)
Fobik style remote key (non‑prox) with integrated emergency blade (2008-2009)

Common fob FCC IDs: OHT692427AA, OHT692713AA, KOBDT04A, IYZ-C01C — check the back of your fob; we confirm the exact variant on site.

2003 Dodge Grand Caravan

Route verified — exact steps vary by trim/equipment

Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.

Show the programming methods (20 steps)

Vehicle & Requirement Notes

Programming step

1 Model specified: 2003 Dodge Grand Caravan keyless entry remote fob smart key.

Programming step

2 Mandatory requirement: one working remote required to add another remote.

Programming step

3 If no working remote available, locksmith with computer required to program first remote.

Doors lock-cycle (confirm)

4 Ignition chime used as feedback during programming steps.

Programming step

5 Battery replacement suggestion referenced for non-working fob.

Initial Resynchronization Step

Press / hold a fob button

1 Using working remote, press LOCK button 5 times.

Wait / timing window

2 Interval between LOCK presses: 2 seconds.

Programming step

3 Purpose: resynchronize working remote before programming procedure.

Programming step

4 No ignition action required for this resynchronization step.

Programming step

5 Step labeled as first action in procedure list.

Entering Programming Mode

Insert the key

1 Insert key into ignition and turn to RUN position (as far as possible without cranking).

Wait / timing window

2 Wait for ignition chimes to stop before proceeding.

Press / hold a fob button

3 Using working remote, press and hold UNLOCK button for 4 to 10 seconds.

Press / hold a fob button

4 Within that 4–10 second window, press PANIC button for 1 second while continuing to press UNLOCK.

Wait / timing window

5 Chime will sound (allow ~3 seconds) indicating entry into remote programming mode.

Programming Remotes

Press LOCK + UNLOCK

1 Within 30 seconds of programming-mode chime, press and release LOCK and UNLOCK simultaneously on working remote.

Press / hold a fob button

2 After simultaneous press, press and release UNLOCK on working remote; chime indicates remote programmed.

Press LOCK + UNLOCK

3 For new/replacement remote, press and release LOCK and UNLOCK simultaneously, then press and release UNLOCK; chime confirms programming.

Press LOCK + UNLOCK

4 Repeat simultaneous LOCK+UNLOCK then UNLOCK sequence for each additional replacement remote; chime expected after each.

Remove the key

5 Turn ignition OFF and remove key after programming sequence completion.

Keys & fobs that fit the 2003 Grand Caravan

Chrysler Transponder Key (chip ID64)Transponder KeyView fob →Lear 3-Button Remote Key Fob (FCC ID GQ43VT17T)RemoteView fob →Lear Remote Key Fob (FCC ID GQ43VT18T)RemoteView fob →Continental Automotive Remote Head Key (FCC ID M3N)Remote KeyView fob →

For the 2003 Grand Caravan: Grand Caravan key replacement & all compatible fobs →

2004–2007 Dodge Grand Caravan

Route verified — exact steps vary by trim/equipment

Show the programming methods (23 steps)

Procedure Requirements

Programming step

1 Applicable only to vehicles built in USA.

Programming step

2 Two working programmed remotes/keys required before adding a third.

Programming step

3 Procedure will not work if only one working remote/key available.

Programming step

4 New remote/key must be cut prior to programming.

Doors lock-cycle (confirm)

5 Security light and chime used as programming indicators.

Step‑by‑Step Programming Sequence

Turn ignition to ON

1 Using first programmed remote/key, turn ignition to ON for 5 seconds (do not crank engine); turn off and remove.

Insert the key

2 Within 5 seconds, insert second programmed remote/key, turn ignition to ON (do not crank); security light begins flashing and chime heard within 10 seconds; turn off and remove.

Insert the key

3 Within 5 seconds, insert third NEW CUT remote/key, turn ignition to ON (do not crank); security light should flash and chime heard within 10 seconds.

Programming step

4 Programming complete when security light goes out; turn remote/key to OFF and remove.

Programming step

5 Test key and remote.

Indicators and Notes

Programming step

1 Security light flashing indicates programming mode or progress.

Wait / timing window

2 Chime should be heard within 10 seconds during steps 2 and 3 on some vehicles.

Doors lock-cycle (confirm)

3 Some vehicles may not chime; only security light will flash in those cases.

Programming step

4 Security light going out signals successful programming of new remote/key.

Wait / timing window

5 Removal of each key required within specified timing intervals (within 5 seconds).

Troubleshooting and Battery/Replacement Links

Programming step

1 Key fob not working? Try replacing the battery.

Programming step

2 Link provided for finding key fob battery.

Programming step

3 Link provided for finding replacement key fob.

Programming step

4 If procedure fails due to insufficient working remotes/keys, locksmith assistance may be necessary.

Document and Legal Info

Programming step

1 Title: Dodge Grand Caravan Keyless Entry Remote Fob Programming Instructions.

Programming step

2 Print instruction option available.

Programming step

3 Website navigation: Home, Disclaimer, YouTube, Privacy Policy.

Programming step

4 Content presented as programming instructions; follow timing and sequence exactly.

Keys & fobs that fit the 2004–2007 Grand Caravan

For the 2004–2007 Grand Caravan: Grand Caravan key replacement & all compatible fobs →

2008–2009 Dodge Grand Caravan

Route verified — exact steps vary by trim/equipment

Show the programming methods (18 steps)

Vehicle and Document Identification

Programming step

1 Procedure applies to RKE transmitters (Fobiks) and integrated key Fobiks

Programming step

2 Limitation: once a NEW RKE Fobik is programmed, it cannot be re-programmed to another vehicle

Programming step

3 Dealer contact required if no valid RKE Fobik or only one valid Fobik remains

Programming Requirement Scenarios

Programming step

1 Two valid RKE transmitters available: self-programming procedure usable

Programmer / scan tool

2 One working remote/key: dealer or aftermarket programmer needed (link referenced)

Programming step

3 No working keys: local authorized dealer or locksmith must be contacted (link referenced)

Programming step

4 RKE transmitter integrated with key is programmed during the procedure

Programming step

5 Note on battery troubleshooting: replace key fob battery if key fob not working (link referenced)

Step 1 and Step 2 Sequence

Remove the key

1 Insert first valid key Fobik, turn ignition ON for ≥3 seconds and ≤15 seconds, then turn to LOCK/OFF and remove first key

Remove the key

2 Insert second valid key Fobik within 15 seconds, turn ignition ON, after 10 seconds chime may sound and Vehicle Security Light will begin to flash, then turn to LOCK/OFF and remove second key

Programming step

3 Timing constraints: strict windows for ON duration and intervals between steps

Programming step

4 Vehicle Security Light behavior begins during Step 2 indicating entry into programming sequence

Doors lock-cycle (confirm)

5 Chime may provide auditory confirmation during Step 2

Step 3 and Programming Confirmation

Insert the key

1 Insert NEW key Fobik within 60 seconds of Step 2 and turn ignition ON

Wait / timing window

2 After 10 seconds a single chime will sound confirming programming progress

Turn ignition to ON

3 Vehicle Security Light sequence: stop flashing, turn on for three seconds, then turn off indicating successful programming

Programming step

4 Result: new key Fobik is programmed and RKE transmitter is also programmed

Programming step

5 Procedure repeatable to program additional keys up to total allowed

Keys & fobs that fit the 2008–2009 Grand Caravan

Lear Transponder Key (chip PCF7941)Standard KeyView fob →

For the 2008–2009 Grand Caravan: Grand Caravan key replacement & all compatible fobs →

How we validate this guide

Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.

Year	Route status	Exact steps
2003	Route verified	General guidance
2004–2007	Route verified	General guidance
2008–2009	Route verified	General guidance

Common questions

Does my 2003 Dodge Grand Caravan key need programming?

Yes. The 2003 Grand Caravan uses a Y160 transponder key that must be programmed to the van’s immobilizer; the separate keyless entry remote also requires programming.

What kind of key does a 2006 Dodge Grand Caravan use?

2004–2007 Grand Caravan models use a remote-head key that combines the transponder key blade and keyless entry remote in one unit, which must be programmed to the vehicle.

What key fob style is on a 2008 or 2009 Grand Caravan?

2008–2009 Grand Caravan models use an IYZ-C01C Fobik-style remote key, typically non-proximity, that includes both the remote functions and the electronic ignition chip.

Can you program a Grand Caravan key fob without going to the dealership?

For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.

Does this program the remote only, or the transponder key too?

It depends on your key type. Tell us your FCC ID and we will confirm.

What if my year says professional programming required?

Those years need a programmer or security access; we bring the tool to you and program it on site.

How much does it cost?

It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.

Need your Grand Caravan fob programmed? We come to you, 24/7.

Call (833) 439-8636 Get a quote