Dodge Magnum Key Fob Programming by Year
Can you program a Magnum fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2005–2007 | Yes | Yes - onboard relearn | Yes (2 working) | Possible | Med | Follow the steps below |
| 2008 | No | No - needs a programmer/tool | Yes (1 working) | Possible | Med | We bring the tool to you |
Dodge Magnum key types & programming facts
2005-2007 Dodge Magnum models in the U.S./Canada use a 3‑button remote‑head key that combines the remote functions with a transponder ignition key. These keys and remotes require electronic programming, typically via OBD‑based tools or dealer equipment; adding keys generally cannot be completed by simple manual button presses. By 2008, many Magnums use a Fobik‑style remote that also requires electronic programming; the exact FCC ID and part number are identified by checking the original fob or dealer records by VIN.
Key types used on the Magnum:
- remote-head key (integrated remote + transponder blade) (2005-2007)
- Fobik-style remote key (remote with integrated transponder, separate from mechanical emergency key) (2008)
Common fob FCC IDs: OHT692427AA, KOBDT04A, OHT692713AA — check the back of your fob; we confirm the exact variant on site.
2005–2007 Dodge Magnum
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (19 steps)
Vehicle/Model Limits
Prerequisites
Step-by-Step Programming
Troubleshooting & Alternatives
For the 2005–2007 Magnum: Magnum key replacement & all compatible fobs →
2008 Dodge Magnum
Professional programming required
Professional programming for the 2008
This year needs a programmer/scan tool - there is no owner-followable onboard sequence. A mobile locksmith confirms your key type and FCC ID, then programs it on site.
For the 2008 Magnum: Magnum key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2005–2007 | Route verified | General guidance |
| 2008 | Route verified (tool) | Professional route |
Common questions
What type of key does my 2005-2007 Dodge Magnum use?
It uses a 3‑button remote‑head key that combines the key blade, transponder chip, and keyless entry remote into one unit.
Can I program a new Dodge Magnum key fob myself?
Programming typically requires a compatible OBD key programmer or dealer-level equipment; it is not a simple manual on‑off or button‑only procedure.
How do I find the correct FCC ID for my 2008 Dodge Magnum fob?
Check the back of your existing fob for the FCC ID and part number, or contact a Dodge dealer with your VIN if it is missing or unreadable.
Can you program a Magnum key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.