Dodge Stratus Key Fob Programming by Year

Can you program a Stratus fob without the dealer? For most years, yes. Pick your year for the route and best next step.

Find your year

YearDIY onboard?How it programsWorking fob?Erase riskConfidenceBest next step
2001–2006YesYes - onboard relearnYes (1 working)PossibleMedFollow the steps below

Dodge Stratus key types & programming facts

For the Dodge Stratus, published replacement listings indicate a standard remote keyless-entry fob across 2001-2006, with at least one 2001-2006 Stratus sedan listing calling out FCC ID GQ43VT17T and part number 4602260. Replacement remotes for this model are described as programmatically paired to the vehicle using an onboard route rather than requiring advanced tooling in the sources provided.

Key types used on the Stratus:

  • standard remote keyless-entry fob (2001-2006)
  • traditional metal ignition key (2001-2006)

Common fob FCC IDs: GQ43VT17T — check the back of your fob; we confirm the exact variant on site.

2001–2006 Dodge Stratus

Route verified — exact steps vary by trim/equipment

Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.

Show the programming methods (20 steps)

Pre-Programming Steps

Press / hold a fob button
1 Resynchronize existing remote: press LOCK 5 times at 2-sec intervals
Insert the key
2 Insert key into ignition; turn to RUN (do not crank)
Wait / timing window
3 Wait for ignition chimes to stop before proceeding
Programming step
4 Ensure one working programmed remote available
Remove the key
5 Remove key and turn ignition OFF only after programming complete

Entering Programming Mode

Press / hold a fob button
1 Press and hold UNLOCK on working remote for 4–10 seconds
Press / hold a fob button
2 While holding UNLOCK, press PANIC on programmed remote for 1 sec
Programming step
3 Release both buttons after PANIC press
Wait / timing window
4 Allow up to 3 seconds for chime indicating programming mode entered
Wait / timing window
5 Proceed within 30 seconds of the chime

Programming Additional Remotes

Press LOCK + UNLOCK
1 Within 30 seconds, press/release LOCK and UNLOCK simultaneously
Programming step
2 Immediately press/release UNLOCK on the same remote
Doors lock-cycle (confirm)
3 Chime indicates remote has been programmed
Press LOCK + UNLOCK
4 For each additional remote: press/release LOCK+UNLOCK, then UNLOCK
Doors lock-cycle (confirm)
5 Chime after each successfully programmed additional remote

Completion and Troubleshooting

Remove the key
1 Turn ignition OFF and remove key after programming
Doors lock-cycle (confirm)
2 Test all remotes to confirm functionality
Programming step
3 If no working remote available, contact locksmith for computer programming
Programming step
4 Battery replacement suggested if key fob not working
Programming step
5 Resources: links for key fob battery and replacement fob (as provided)

How we validate this guide

Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.

YearRoute statusExact steps
2001–2006Route verifiedGeneral guidance

Common questions

What FCC ID is used for the Dodge Stratus remote?

Published replacement listings for the 2001-2006 Stratus identify FCC ID GQ43VT17T.

Does the Dodge Stratus use a smart key or push-to-start fob?

No source provided for the 2001-2006 Stratus describes a smart or proximity key; the listed remote is a standard keyless-entry fob.

What does programming a Dodge Stratus key usually involve?

For this model, the available sources indicate an onboard programming route for the remote; the provided references do not describe a smart-key or immobilizer-bypass procedure.

Can you program a Stratus key fob without going to the dealership?

For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.

Does this program the remote only, or the transponder key too?

It depends on your key type. Tell us your FCC ID and we will confirm.

What if my year says professional programming required?

Those years need a programmer or security access; we bring the tool to you and program it on site.

How much does it cost?

It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.

Need your Stratus fob programmed? We come to you, 24/7.
Scroll to Top
☎  Tap to call 24/7 — (833) 439-8636