Ford Excursion Key Fob Programming by Year

Can you program a Excursion fob without the dealer? For most years, yes. Pick your year for the route and best next step.

Find your year

YearDIY onboard?How it programsWorking fob?Erase riskConfidenceBest next step
2003YesYes - onboard relearnHighFollow the steps below

Ford Excursion key types & programming facts

For the 2003 Ford Excursion, programming a key/remote involves matching the correct replacement remote to the vehicle’s remote entry system and then using the model’s onboard programming route for the remote functions. Sources for this model identify factory-style remote key fobs and replacement remotes by FCC ID, indicating a conventional keyless-entry setup rather than a smart/proximity system.

Key types used on the Excursion:

  • remote-keyless-entry transmitter / standard remote fob (2003)
  • transponder key

Common fob FCC IDs: CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T — check the back of your fob; we confirm the exact variant on site.

2003 Ford Excursion

Route verified — exact steps vary by trim/equipment

Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.

Show the programming methods (15 steps)

Preparation

Programming step
1 Ensure all doors closed before starting procedure
Press / hold a fob button
2 Open driver’s door and press UNLOCK on driver’s door panel while door remains open
Insert the key
3 Insert key in ignition before beginning ignition cycling step
Programming step
4 Allow access to multiple remotes if programming more than one
Programming step
5 Verify availability of replacement battery or replacement key fob links if needed

Programming sequence

Cycle the ignition ON/OFF
1 Turn ignition from OFF to RUN eight times within 10 seconds, ending the eighth in RUN
Cycle the ignition ON/OFF
2 Door locks cycle to confirm entry into programming mode after ignition sequence
Cycle the ignition ON/OFF
3 Within 20 seconds, press any button on first keyless remote to program; door locks cycle to confirm
Cycle the ignition ON/OFF
4 Within 20 seconds after first remote, press any button on second keyless remote; door locks cycle again to confirm
Cycle the ignition ON/OFF
5 Turn ignition to OFF to end programming; locks cycle to indicate end of programming mode

Troubleshooting & related actions

Programming step
1 Check key fob battery if key fob not working
Programming step
2 Use provided link to find the correct key fob battery
Programming step
3 Use provided link to find and replace entire key fob if battery replacement insufficient
Programming step
4 Consider contacting local locksmith via provided phone number for assistance
Wait / timing window
5 Verify each step timing (10-second/20-second windows) if programming fails

How we validate this guide

Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.

YearRoute statusExact steps
2003Route verifiedGeneral guidance

Common questions

Does the 2003 Ford Excursion use a smart key or push-to-start fob?

No source here identifies a smart/proximity or push-to-start system for the 2003 Excursion; the listed remotes are conventional keyless-entry fobs.

Which FCC IDs are listed for 2003 Ford Excursion remotes?

Sources list CWTWB1U345, CWTWB1U331, CWTWB1U212, and GQ43VT11T for 2003 Excursion remote fobs.

Is onboard programming available for this model?

Yes. The user-provided query states onboard programming applies across these years, and the listed product pages provide pairing instructions for replacement remotes.

Can you program a Excursion key fob without going to the dealership?

For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.

Does this program the remote only, or the transponder key too?

It depends on your key type. Tell us your FCC ID and we will confirm.

What if my year says professional programming required?

Those years need a programmer or security access; we bring the tool to you and program it on site.

How much does it cost?

It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.

Need your Excursion fob programmed? We come to you, 24/7.
Scroll to Top
☎  Tap to call 24/7 — (833) 439-8636