Ford Five Hundred Key Fob Programming by Year
Can you program a Five Hundred fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2005–2007 | Yes | Yes - onboard relearn | No (all-keys-lost OK) | Possible | Med | Follow the steps below |
Ford Five Hundred key types & programming facts
Ford Five Hundred (2005-2007) models use an immobilizer transponder key system plus a separate or integrated keyless entry remote, depending on trim. Remote transmitters can be added via an onboard procedure using the ignition switch and a timed sequence that cycles the door locks to confirm programming mode. Adding or replacing a transponder/remote-head key typically requires cutting the key and programming it to the vehicle’s anti-theft system, often performed by a locksmith or dealer.
Key types used on the Five Hundred:
- transponder chip key (separate metal key + stand‑alone keyless entry remote) (2005-2007 (base/various trims – transponder key referenced generally for Ford Five Hundred))
- remote-head key (integrated key + remote) (2005-2007 (some trims – supplier notes model may use remote head key depending on year/trim))
2005–2007 Ford Five Hundred
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (18 steps)
Programming Steps
Related Products & Services
Confirmation & Feedback Signals
Administrative & Legal
For the 2005–2007 Five Hundred: Five Hundred key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2005–2007 | Route verified | General guidance |
Common questions
Does my 2005-2007 Ford Five Hundred use a chip key?
Yes. The Ford Five Hundred uses an immobilizer transponder key system; some vehicles use a traditional chip key with a separate remote, others a remote-head key.
Can I program a new keyless entry remote myself?
Yes. The 2005-2007 Ford Five Hundred supports onboard programming of keyless entry remotes using the ignition and a timed on‑off sequence.
Do all Ford Five Hundred keys have built-in remote buttons?
No. Parts suppliers note this model may use either a traditional transponder key plus separate remote, or a remote-head key, depending on year and trim.
Can you program a Five Hundred key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.