Honda Passport Key Fob Programming by Year
Can you program a Passport fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2000–2002 | Yes | Yes - onboard relearn | — | — | High | Follow the steps below |
Honda Passport key types & programming facts
2000–2002 Honda Passport models use a conventional metal ignition key and a separate keyless-entry remote; there is no immobilizer transponder chip documented for these years. Remote transmitters can be added or replaced by cycling the ignition and doors in a specific sequence to enter programming mode, then teaching the vehicle each remote. Cutting a replacement key is a standard mechanical key-cut service, while remote programming can typically be performed onboard without a scan tool.
Key types used on the Passport:
- standard metal key (no transponder) with separate keyless entry remote (2000-2002 (USA/Canada))
Common fob FCC IDs: HYQ1512R — check the back of your fob; we confirm the exact variant on site.
2000–2002 Honda Passport
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (20 steps)
Preparation steps
Entering programming mode
Transmitter programming
Completion and troubleshooting
For the 2000–2002 Passport: Passport key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2000–2002 | Route verified | General guidance |
Common questions
Does my 2000–2002 Honda Passport key have a transponder chip?
Locksmith and remote suppliers describe these years using a standard metal key with a separate remote, with no separate transponder chip information listed.
Can I program a new remote for my 2000–2002 Passport myself?
Yes. Published procedures use an onboard method involving rapid ignition ACC/LOCK cycling and door-open/close steps to program remotes.
Is the same remote used for 2000–2002 Honda Passport models?
Keyless-entry suppliers list a 3-button Passport remote with FCC ID HYQ1512R covering these later model years.
Can you program a Passport key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.