Isuzu Amigo Key Fob Programming by Year
Can you program a Amigo fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2000 | Yes | Yes - onboard relearn | — | Possible | High | Follow the steps below |
Isuzu Amigo key types & programming facts
For the 2000 Isuzu Amigo, published sources identify a 3-button keyless entry remote using FCC ID HYQ1512R, and vehicle listings place that remote with 1998-2000 Amigo coverage. A programming-instructions source exists for the 2000 Amigo remote, and the user notes onboard programming, indicating the remote can be programmed without specialized bench or module work.
Key types used on the Amigo:
- keyless entry remote fob (1998-2000)
- transponder key
- remote-head key
- flip key
- smart/proximity push-to-start
Common fob FCC IDs: HYQ1512R — check the back of your fob; we confirm the exact variant on site.
2000 Isuzu Amigo
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (21 steps)
Vehicle and Document Identification
Preparation Steps
Ignition and Door Sequence (Entry into Programming Mode)
Transmitter Programming Steps
Finalization and Troubleshooting
For the 2000 Amigo: Amigo key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2000 | Route verified | General guidance |
Common questions
What remote FCC ID fits a 2000 Isuzu Amigo?
Published listings identify FCC ID HYQ1512R for the 2000 Isuzu Amigo 3-button keyless entry remote.
Does the 2000 Isuzu Amigo use a smart key or push-to-start fob?
No source provided identifies a smart or proximity system for the 2000 Amigo; the listed remote is a conventional keyless entry fob.
Is the 2000 Isuzu Amigo remote programmable onboard?
A model-specific programming guide is published for the 2000 Amigo remote, consistent with onboard programming availability.
Can you program a Amigo key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.