Isuzu i350 Key Fob Programming by Year
Your i350 needs a programmer or security access — but not the dealer. We come to you and program it on site. Find your year below.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2006 | No | No - professional only | — | — | Med | We program it on site |
Isuzu i350 key types & programming facts
The 2006 Isuzu i‑350 uses a separate transponder ignition key and a 3‑button keyless-entry remote with FCC ID L2C0007T. Programming of both the immobilizer key and the remote requires professional tools or procedures typically performed by a locksmith or dealership, not on-board customer programming.
Key types used on the i350:
- transponder chip key (separate metal key + standalone keyless-entry remote) (2006)
Common fob FCC IDs: L2C0007T — check the back of your fob; we confirm the exact variant on site.
About programming your Isuzu i350 key
Across the 2006 Isuzu i350 model years we cover, key programming is manufacturer-controlled: every year listed above routes to a programmer or security-access procedure rather than an owner-followable onboard sequence. That is normal for this platform — the immobilizer pairs the key’s transponder to the vehicle through an encrypted handshake, so a blank or aftermarket fob will not start the engine until it is properly programmed.
What that means for you: you do not need the dealership. A mobile locksmith brings the programmer to your location, identifies your exact key type and FCC ID from the fob, cuts or sources the correct key if needed, and programs it on site — including all-keys-lost cases where no working key remains.
To program your i350, have ready: your model year and trim, whether you still have a working key, and the fob itself if you have one (the FCC ID printed on the back identifies the exact key variant). Call (833) 439-8636 and we confirm the route and a firm price before we dispatch.
2006 Isuzu i350
Professional programming required
Professional programming for the 2006
This year requires professional programming (security access / tool). A mobile locksmith confirms your key type and FCC ID, then programs it on site.
For the 2006 i350: i350 key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2006 | Professional-only | Professional route |
Common questions
What type of key does a 2006 Isuzu i‑350 use?
It uses a standard metal transponder ignition key plus a separate 3‑button keyless-entry remote fob, rather than a flip key, remote-head key, or proximity smart key.
Which FCC ID remote works with a 2006 Isuzu i‑350?
Sources list a 3‑button keyless-entry remote with FCC ID L2C0007T and part numbers including 10335583 and 10335582‑88 as compatible with the 2006 i‑350.
Can I program a new remote for my 2006 Isuzu i‑350 myself?
Programming requires specific procedures and tools; it is generally handled by a professional automotive locksmith or dealer rather than through a simple DIY on‑board sequence.
Can you program a i350 key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.