Nissan Juke Key Fob Programming by Year
Your Juke needs a programmer or security access — but not the dealer. We come to you and program it on site. Find your year below.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2011–2014 | No | No - needs a programmer/tool | Yes (1 working) | Possible | Med | We bring the tool to you |
Nissan Juke key types & programming facts
Nissan Juke models in this range use a smart/proximity key fob that must be electronically programmed to the vehicle through the OBD port with appropriate diagnostic or programming equipment. Programming typically involves registering the new fob’s ID to the vehicle’s immobilizer/BCM so the car recognizes it for remote locking and push‑to‑start operation. Any replacement smart fob usually also requires cutting the internal emergency key blade to the vehicle’s locks.
Key types used on the Juke:
- smart/proximity push-to-start (I‑Key style smart fob with internal emergency blade) (2011-2014 (at least on equipped trims; smart key fob documented for 2011 and 2014 Juke))
Common fob FCC IDs: CWTWB1U808, CWTWB1U751, CWTWB1U816 — check the back of your fob; we confirm the exact variant on site.
About programming your Nissan Juke key
Across the 2011–2014 Nissan Juke model years we cover, key programming is manufacturer-controlled: every year listed above routes to a programmer or security-access procedure rather than an owner-followable onboard sequence. That is normal for this platform — the immobilizer pairs the key’s transponder to the vehicle through an encrypted handshake, so a blank or aftermarket fob will not start the engine until it is properly programmed.
What that means for you: you do not need the dealership. A mobile locksmith brings the programmer to your location, identifies your exact key type and FCC ID from the fob, cuts or sources the correct key if needed, and programs it on site — including all-keys-lost cases where no working key remains.
To program your Juke, have ready: your model year and trim, whether you still have a working key, and the fob itself if you have one (the FCC ID printed on the back identifies the exact key variant). Call (833) 439-8636 and we confirm the route and a firm price before we dispatch.
2011–2014 Nissan Juke
Professional programming required
Professional programming for the 2011–2014
This year needs a programmer/scan tool - there is no owner-followable onboard sequence. A mobile locksmith confirms your key type and FCC ID, then programs it on site.
For the 2011–2014 Juke: Juke key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2011–2014 | Route verified (tool) | Professional route |
Common questions
Does my 2011-2014 Nissan Juke use a traditional metal key or a smart key fob?
Many 2011-2014 Juke models use a smart/proximity key fob with an internal emergency blade, rather than a traditional stand‑alone metal key.
Can I program a used Nissan Juke key fob myself at home?
Programming a Juke smart key fob requires specialized equipment and is normally done via the vehicle’s OBD port by a locksmith or dealer, not by simple at‑home procedures.
What kind of remote/key fob do I need for a 2014 Nissan Juke?
Documented replacement smart key fobs for 2014 Juke list FCC IDs CWTWB1U751 or CWTWB1U816 and part number H0561-C993A/H0561C993A.
Can you program a Juke key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.