Mitsubishi Eclipse Key Fob Programming by Year
Can you program a Eclipse fob without the dealer? For most years, yes. Pick your year for the route and best next step.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2000–2005 | Yes | Yes - onboard relearn | No (all-keys-lost OK) | Possible | Med | Follow the steps below |
| 2006–2012 | Yes | Yes - onboard relearn | — | — | High | Follow the steps below |
Mitsubishi Eclipse key types & programming facts
For 2000–2001 Eclipse models, keyless entry uses a separate key fob remote, and programming can be performed via onboard procedures without special tools when you have the correct remote and follow vehicle-specific steps. For later Eclipse models using a 4‑button remote-head key (documented for 2012), the mechanical key, transponder, and remote functions are combined in one unit, and programming typically requires cutting the key to match the ignition and programming the remote/key to the vehicle so the buttons and immobilizer (where equipped) are recognized. Locksmiths and dealers commonly use diagnostic equipment or manufacturer-approved procedures to complete programming and ensure all functions operate correctly.
Key types used on the Eclipse:
- standard mechanical key (non-transponder) with separate keyless entry remote (2000-2005 (remote documented for 2000-2001; transponder use not confirmed in sources))
- remote-head key (integrated key + remote buttons) with transponder (2006-2012 (4‑button remote-head key documented for 2012))
Common fob FCC IDs: HYQ12ABA, OUCG8D-620M-A — check the back of your fob; we confirm the exact variant on site.
2000–2005 Mitsubishi Eclipse
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (20 steps)
Preparation
Entering Programming Mode
Registering Remotes
Finishing and Troubleshooting
For the 2000–2005 Eclipse: Eclipse key replacement & all compatible fobs →
2006–2012 Mitsubishi Eclipse
Route verified — exact steps vary by trim/equipment
Route verified as onboard programming (no dealer needed). The sequences below are general route guidance — use them only if your vehicle shows the same prompts and controls. If the prompts don’t match, stop and call us.
Show the programming methods (19 steps)
1) Remote fob programming steps
2) Multiple remotes and completion
3) Customer key (immobilizer) programming
4) Completing immobilizer key registration
For the 2006–2012 Eclipse: Eclipse key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2000–2005 | Route verified | General guidance |
| 2006–2012 | Route verified | General guidance |
Common questions
What type of key does my Mitsubishi Eclipse use?
2000–2005 models use a separate metal key and remote, while 2006–2012 models use an integrated remote-head key combining the key blade, transponder, and remote buttons.
Can I program a replacement key fob for my Eclipse myself?
For 2000–2001 models, onboard programming is available for compatible remotes. Later remote-head keys typically require professional programming with proper tools.
Which FCC ID should I match when buying a remote for my Eclipse?
Early models (2000–2001) use remotes with FCC ID HYQ12ABA. A documented 2012 remote-head key uses FCC ID OUCG8D-620M-A; you should always match the FCC ID and part number on your original remote.
Can you program a Eclipse key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.