If you need to replace your Acura MDX key fob or program your Push-To-Start car key, call us at (833) 241-7246. Our expert locksmith technicians are ready to provide professional programming services. Please note that this page specifically offers instructions for keyless entry fob programming and does not cover Acura MDX Smart Key Cars.

Low Rate Locksmith For Acura offers 24/7 mobile Nationwide Auto Locksmith Services for Acura MDX . Our team is equipped with the latest tools to ensure efficient and reliable service. Whether you need a key replacement or programming, our mobile units are always ready to assist you.

For all your Acura MDX key fob replacement and programming needs, contact Low Rate Locksmith at (833) 241-7246.

Please enable JavaScript in your browser to complete this form.

To program your 2009 Acura MDX keyless entry fob, gather your vehicle, fob, ignition key, and the instructions. Open all your doors and insert the key into the ignition, turning it to the ON position. Press the LOCK button on your fob, switch the ignition to LOCK, and leave the key in. Then, turn the ignition from LOCK to ON three times and wait for the door locks to cycle. Press the SECURE button on each fob to sync them, then turn the ignition to LOCK and remove the key. For tips on troubleshooting or low-rate locksmith services, keep on.

Key Takeaways

  • Ensure vehicle’s battery is charged and all doors are open before starting the programming process.
  • Insert the ignition key, turn to ON, press and release the LOCK button on the fob, then turn the ignition to LOCK.
  • Cycle the ignition from LOCK to ON three times, then wait for the power door locks to cycle.
  • Press the SECURE button on each remote to program, then turn the ignition to LOCK and remove the key.
  • If issues arise, confirm the correct key fob model is used and the ignition cycles are precise.

Materials Needed

materials for building projects

To successfully program your 2009 Acura MDX keyless entry fob, you’ll need to gather a few essential materials. Having the right tools at your disposal ensures the process goes smoothly and avoids unnecessary frustration. Let’s jump into what you’ll need before starting the programming procedure.

First, make sure you have all the necessary items ready:

  • Your 2009 Acura MDX vehicle: This seems obvious, but it’s important to have your vehicle on hand.
  • Keyless entry fob: Make sure it’s the correct fob for your model year.
  • Ignition key: You’ll need this for the ignition cycling steps.
  • A quiet environment: Distractions can lead to errors, so choose a calm setting.
  • Printed instructions: Having a hard copy can help you follow each step without missing any details.

Having these materials prepared will set you up for a successful programming session. You’ll avoid the common pitfalls that come from being unprepared, and the process will be more efficient and stress-free. Now that you know what you need, you can proceed with confidence.

Preparation Steps

Begin the preparation steps by making sure all doors of your 2009 Acura MDX are opened. This is essential to prevent the vehicle from locking you out during the programming process. Next, you’ll want to follow these instructions meticulously to guarantee a smooth setup.

  1. Insert your key into the ignition and turn it to the ON position without starting the engine. This powers the vehicle’s electrical systems.
  2. Press and release the LOCK button on your keyless entry fob. This action initializes the fob’s programming mode.
  3. Turn the ignition back to the LOCK position. This resets the vehicle’s programming state.
  4. Leave the key in the ignition. Removing it could disrupt the process and require you to start over.

8 Step-by-Step Programming Instructions for 2009 Acura MDX

programming instructions for acura

To initiate the programming process for your 2009 Acura MDX keyless entry fob, start by turning the ignition to the ON position to activate the vehicle’s electrical systems. Follow these detailed steps carefully to program your keyless entry fob:

  1. Press the RELEASE button on your remote: This action signals the start of the programming process.
  2. Turn the ignition back to the LOCK position, then quickly back to ON: Repeat this cycle three times, ensuring you end in the ON position.
  3. Wait for the power door locks to cycle: This step is crucial as it indicates that the vehicle has successfully entered programming mode.
  4. Press the SECURE button on each remote you wish to program: Within 10 seconds for each remote, press the SECURE button. The power door locks will cycle again to confirm that each remote has been accepted.
  5. Turn the ignition to the LOCK position and remove the key: By completing this step, you will exit the programming mode.

Troubleshooting Tips

If you encounter any issues during the programming process, follow these troubleshooting tips to guarantee a successful outcome. First, make sure your vehicle’s battery is fully charged. A low battery can prevent the programming sequence from completing correctly.

Next, confirm that all doors are unfastened during the process. Locking any door can interrupt the programming mode. Additionally, make sure you’re cycling the ignition switch precisely as instructed. Turn it to the ON position without starting the engine, and then back to LOCK, maintaining a consistent rhythm.

If the power door locks don’t cycle during the process, it’s possible the vehicle is not entering programming mode. Double-check that you’re pressing the LOCK and RELEASE buttons on the remote firmly and holding them long enough.

Also, verify you’re using the correct key fob model compatible with the 2009 Acura MDX. Incompatible remotes won’t sync with your vehicle. It’s advisable to replace the remote’s battery before starting the process to avoid any power-related issues.

Lastly, if after several attempts the programming still fails, reset the system by disconnecting the vehicle’s battery for a few minutes, then reconnect and retry the procedure.

Low Rate Acura Locksmith Keyless Entry and Fob Programming Services

acura locksmith keyless entry

Low Rate Acura locksmiths offer specialized keyless entry and fob programming services to ensure your 2009 Acura MDX remote functions seamlessly. These professionals are equipped with the right tools and expertise, ensuring that the programming process is both efficient and accurate.

First, they’ll open all the doors and turn the ignition to the ON position. Then, they’ll press and release the LOCK button on your remote and turn the ignition back to the LOCK position, leaving the key in the ignition. This initiates the programming sequence.

Next, the locksmith will turn the ignition back to the ON position and press the RELEASE button on the remote. They’ll repeat the ignition cycle and button presses. You’ll know the programming mode is active when the power door locks cycle.

To finalize, the locksmith will press the LOCK button on each remote to program them. The power door locks will cycle again to confirm remote acceptance. They’ll then turn the key back to the LOCK position and remove it from the ignition, exiting programming mode.

For key portion programming, they’ll use specialized equipment, ensuring full remote functionality. For assistance, call 877-675-1507. Proper programming enhances vehicle security and convenience.

Frequently Asked Questions

How Many Remotes Can Be Programmed to a 2009 Acura Mdx?

You can program up to four remotes to a 2009 Acura MDX. Confirm each remote is programmed sequentially during the same session to avoid exiting programming mode prematurely. Follow the step-by-step instructions meticulously for accurate programming.

What Should I Do if the Remote Programming Fails?

If the remote programming fails, double-check each step for accuracy, make sure all doors are opened, and try again. If it still doesn’t work, contact a professional locksmith at 877-675-1507 for further assistance.

Can I Program a New Remote Without the Original One?

You can program a new remote without the original one. Just follow the programming steps: turn the ignition, press the remote buttons, and repeat cycles until the power locks confirm programming mode. Consult your vehicle’s manual for specific instructions.

How Long Does the Programming Process Typically Take?

Typically, the timing to program a remote takes ten to fifteen minutes. Make sure you follow each step precisely and patiently. Quick, careful, and consistent actions are important for completing the process without encountering any complications.

Is Professional Locksmith Assistance Required for Every Step?

You don’t need a professional locksmith for every step. You can handle most programming steps yourself. However, for programming the key portion, you should contact a locksmith. Follow the instructions carefully to guarantee success.

Other Acura Models We Provide Free Keyless Entry Programming Instructions

Acura MDX
Acura RDX
Acura ILX
Acura NSX
Acura RL
Acura MDX
Acura TSX
Acura ZDX
Acura RSX
Acura RLX
Acura CL
Acura Integra
Acura TL