Honda

Honda Element Key Fob Replacement Service

Low Rate Locksmith Can help you with all of your Honda Element keys needs
We are mobile and we are available 24/7
We have techs available across the United States

Call us Now

24 Hour Service

Fast Response Time

Don't Wait Call Now

Licensed Locksmith

Click on the year of The Honda Element to get Remote Key Fob Free instructions:

2003 Element key fob programming instructions
2004 Element key fob programming instructions
2005 Element key fob programming instructions
2006 Element key fob programming instructions
2007 Element key fob programming instructions
2008 Element key fob programming instructions
2009 Element key fob programming instructions

Step-By-Step instructions to program 2003-2009 Honda Element key fob (Method 1):

Note:
Entering the programming mode cancels all learned keyless remotes, so none
of the previously programmed remotes will work. You must reprogram all of the
keyless remotes once you are in the programming mode.

You must complete each step within 5 seconds of the previous step to keep the
system from exiting the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed
remote can be used for this step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote. Make sure the power door
locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make
sure door locks cycle after you push each remote button to confirm system has
accepted the remote.

8. Turn the ignition switch to LOCK (0) to exit programming mode.

9. Test remote(s)

Step-By-Step instructions to program 2003-2009 Honda Element key fob (Method 2):

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

Step-by-Step How To Programming Instructions:

  1. ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
  2. INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
  3. PERFORM each of the next three (3) steps in order, then repeat all three (3) steps two (2) more times for a total of three (3) times each.
  4. TURN the Ignition to the ON position, marked “II” on the Ignition.
  5. PRESS the LOCK button on the remote for approximately 1 second. (Say “Mississippi”)
  6. TURN the Ignition to the OFF position, marked “I” on the Ignition. (REPEAT Steps 4-6 three (3) times)
  7. TURN the Ignition switch to the ON position, marked “II” on the Ignition.
  8. PRESS the LOCK button on the same remote. The door locks should cycle indicating the vehicle has ENTERED Programming Mode.
  9. PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
  10. For programming additional remotes to your vehicle, REPEAT Step 9 with each additional remote one after another. Step 9 must be completed within ten (10) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
  11. TURN the ignition to OFF.
  12. Test all remotes. Programming is now complete.
  13. After successful programming, if your remote has a TRUNK RELEASE Button — you will need to hold that button down for 5-10 seconds for that function to begin operation.
  14. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Step-By-Step instructions to program 2009-2018 Honda Element key fob (Method 1):

Note:
Entering the programming mode cancels all learned keyless remotes, so none
of the previously programmed remotes will work. You must reprogram all of the
keyless remotes once you are in the programming mode.

You must complete each step within 5 seconds of the previous step to keep the
system from exiting the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed
remote can be used for this step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote. Make sure the power door
locks cycle to confirm you are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make
sure door locks cycle after you push each remote button to confirm system has
accepted the remote.

8. Turn the ignition switch to LOCK (0) to exit programming mode.

9. Test remote(s)

Step-By-Step instructions to program 2009-2018 Honda Element key fob (Method 2):

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

Step-by-Step How To Programming Instructions:

  1. ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
  2. INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
  3. PERFORM each of the next three (3) steps in order, then repeat all three (3) steps two (2) more times for a total of three (3) times each.
  4. TURN the Ignition to the ON position, marked “II” on the Ignition.
  5. PRESS the LOCK button on the remote for approximately 1 second. (Say “Mississippi”)
  6. TURN the Ignition to the OFF position, marked “I” on the Ignition. (REPEAT Steps 4-6 three (3) times)
  7. TURN the Ignition switch to the ON position, marked “II” on the Ignition.
  8. PRESS the LOCK button on the same remote. The door locks should cycle indicating the vehicle has ENTERED Programming Mode.
  9. PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
  10. For programming additional remotes to your vehicle, REPEAT Step 9 with each additional remote one after another. Step 9 must be completed within ten (10) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
  11. TURN the ignition to OFF.
  12. Test all remotes. Programming is now complete.
  13. After successful programming, if your remote has a TRUNK RELEASE Button — you will need to hold that button down for 5-10 seconds for that function to begin operation.
  14. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Key Fob Programming FAQ:

Q: What does it cost to have a key fob programmed?

At the dealership, the cost of replacing an electronic fob can range from $50-$90, depending on the automaker or complexity of the design. All fobs need to be programmed. Some dealerships will do it for free, while others will charge a half hour to an hour of labor.

With Low Rate Locksmith you can program your key fob by yourself for free!

Q: How do you program a key fob?

You find the instructions here are Low Rate Locksmith Honda Key replacement Fob Programming Sections.

Q: Can you program a key fob at home?

You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle.

Q: I lost the key Fob and the key to my 2005 Honda Element, what should I do?

Don’t panic. Low Rate Locksmith can help you replace your 2005 Honda Element Key and remote.