Ford 4-Button Remote Fob (FOR-4B-TR-345) | Low Rate Locksmith

Product identification and basic function

The producer 4-Button Remote Fob (FOR-4B-TR-345) is an aftermarket keyless-entry remote fob used to send lock/unlock and related commands to a compatible receiver module on supported vehicles. The maker 4-Button Remote Fob (FOR-4B-TR-345) is presented as a replacement for a lost or damaged remote, or as an additional remote for a driver who already has at least one working remote.

Button layout is part of the visual fitment check. The dealer 4-Button Remote Fob (FOR-4B-TR-345) is described with four buttons: Lock, Unlock, trunk release, and Panic. The factory supplier 4-Button Remote Fob (FOR-4B-TR-345) is also described as shipping with a battery pre-installed, which affects initial setup but does not remove the need for correct pairing/programming where required.

Branding status matters for buyers expecting factory markings. The original supplier 4-Button Remote Fob (FOR-4B-TR-345) is described as aftermarket and not OEM, and the supplier 4-Button Remote Fob (FOR-4B-TR-345) is described as having no The manufacturer logo. This is a normal aftermarket characteristic and should not be used as the sole indicator of compatibility.

Compatibility, limitations, and fitment checks

Fitment for Ford-compatible 4-Button Remote Fob (FOR-4B-TR-345) is explicitly listed as 2007–2011 Ford Crown Victoria. In practice, This listing 4-Button Remote Fob (FOR-4B-TR-345) fitment verification should be treated as an identifier-matching exercise: confirm the listed year range and cross-check the remote identifiers from the existing remote or the vehicle documentation.

This item 4-Button Remote Fob (FOR-4B-TR-345) is also described as not for vehicles with push-button start (“smart” key). If a vehicle uses a push-button start system, This product 4-Button Remote Fob (FOR-4B-TR-345) is listed as not compatible, and a different smart-key style product is typically required.

Programming prerequisites are called out as a limitation. The producer 4-Button Remote Fob (FOR-4B-TR-345) is described as requiring an existing key to program a new key to the vehicle, and it is described as not programming without an existing key present. For that reason, The maker 4-Button Remote Fob (FOR-4B-TR-345) is best evaluated alongside the buyer’s current “all keys lost” status and whether a working key is available at the time of pairing.

For buyers comparing names and listings, The dealer 4-Button Remote Fob (FOR-4B-TR-345) may also appear under the product code reference FOR-4B-TR-345-FOB. When the label differs, The factory supplier 4-Button Remote Fob (FOR-4B-TR-345) should still be matched by its identifiers and the stated 2007–2011 Ford Crown Victoria fitment range.

Identifiers and cross-reference information

For accurate matching, The original supplier 4-Button Remote Fob (FOR-4B-TR-345) should be verified against the listed replacement part numbers and the listed FCC IDs. The supplier 4-Button Remote Fob (FOR-4B-TR-345) is presented as replacing specific part numbers and being associated with specific FCC IDs; these identifiers are often the most reliable way to avoid ordering the wrong remote style for a 2007–2011 Ford Crown Victoria.

Programming, installation, and support pathways

The manufacturer 4-Button Remote Fob (FOR-4B-TR-345) is described as Programmable-UNEZ and is associated with an EZ Installer™ Programmer statement that is described as guaranteed to program the fob for listed vehicles. Ford-compatible 4-Button Remote Fob (FOR-4B-TR-345) buyers should treat “programmable” as a requirement to complete pairing steps; a compatible method (such as the referenced programmer) may be needed to complete setup.

This listing 4-Button Remote Fob (FOR-4B-TR-345) is also described with an “existing key required” limitation for programming a new key to the vehicle, and it is described as not programming without an existing key present. In practical terms, This item 4-Button Remote Fob (FOR-4B-TR-345) is a better fit when at least one working key is already available, because some programming paths depend on that prerequisite.

For buyers who want professional assistance, This product 4-Button Remote Fob (FOR-4B-TR-345) is described with an availability of professional cutting and programming through a partner service, including a stated partnership with Car Keys Express. Service appointments are described as requiring scheduling and booking; this may apply when a technician is requested to pair the remote and address related key services.

The producer 4-Button Remote Fob (FOR-4B-TR-345) is also described with an option to add a Key-by-Photo service for a pre-cut key delivered with an order. When this add-on is used, the goal is to reduce mismatch risk for an automotive key cutting step by producing a pre-cut key for the specific vehicle, but the remote pairing requirement for The maker 4-Button Remote Fob (FOR-4B-TR-345) can still remain separate depending on the vehicle’s system.

Ordering notes, pricing, and availability (DOM-isolated)

The dealer 4-Button Remote Fob (FOR-4B-TR-345) ordering information can change over time; the table below records the cleaned source snapshot and should be treated as a reference rather than a permanent guarantee.

Guarantee and support information

The factory supplier 4-Button Remote Fob (FOR-4B-TR-345) is described as having a money-back guarantee if it is not compatible with vehicles listed for fitment. Because The original supplier 4-Button Remote Fob (FOR-4B-TR-345) fitment is listed specifically for 2007–2011 Ford Crown Victoria, the compatibility statement should be interpreted narrowly: the guarantee is tied to the vehicles listed, not to universal fitment.

• Product: Ford 4-Button Remote Fob (FOR-4B-TR-345) (aftermarket; not OEM; no Ford logo)
• Support contact: info@lowratelocksmith.com
• Fitment listed: 2007–2011 Ford Crown Victoria (USA & Canada)
• Limitation listed: not for push-button start (“smart” key)