Jeep Compass Key Fob Programming by Year
Your Compass needs a programmer or security access — but not the dealer. We come to you and program it on site. Find your year below.
Find your year
| Year | DIY onboard? | How it programs | Working fob? | Erase risk | Confidence | Best next step |
|---|---|---|---|---|---|---|
| 2007–2017 | No | No - needs a programmer/tool | Yes (1 working) | Possible | Med | We bring the tool to you |
Jeep Compass key types & programming facts
2007–2017 Jeep Compass models in the U.S. and Canada use an onboard-diagnostic (OBD) programming route for adding keys and remotes, typically performed with a professional scan/programming tool connected to the vehicle’s OBD port. The vehicle’s immobilizer must recognize the transponder in the new remote-head key, and the remote functions must be electronically registered to the vehicle at the same time. A compatible, correctly cut remote-head key with the proper FCC ID and chip type is required for successful programming.
Key types used on the Compass:
- remote-head key (integrated remote + metal blade, transponder chip inside) (2007-2017)
Common fob FCC IDs: OHT692427AA, OHT692713AA, KOBDT04A — check the back of your fob; we confirm the exact variant on site.
About programming your Jeep Compass key
Across the 2007–2017 Jeep Compass model years we cover, key programming is manufacturer-controlled: every year listed above routes to a programmer or security-access procedure rather than an owner-followable onboard sequence. That is normal for this platform — the immobilizer pairs the key’s transponder to the vehicle through an encrypted handshake, so a blank or aftermarket fob will not start the engine until it is properly programmed.
What that means for you: you do not need the dealership. A mobile locksmith brings the programmer to your location, identifies your exact key type and FCC ID from the fob, cuts or sources the correct key if needed, and programs it on site — including all-keys-lost cases where no working key remains.
To program your Compass, have ready: your model year and trim, whether you still have a working key, and the fob itself if you have one (the FCC ID printed on the back identifies the exact key variant). Call (833) 439-8636 and we confirm the route and a firm price before we dispatch.
2007–2017 Jeep Compass
Professional programming required
Professional programming for the 2007–2017
This year needs a programmer/scan tool - there is no owner-followable onboard sequence. A mobile locksmith confirms your key type and FCC ID, then programs it on site.
For the 2007–2017 Compass: Compass key replacement & all compatible fobs →
How we validate this guide
Year coverage comes from our consolidated vehicle programming dataset. Route-level programming status is reviewed against internal route sheets and available manufacturer, security-access, and professional tool references. Exact button sequences are marked source-verified only when we have year/equipment-specific support; where a year is labeled “route verified, steps vary,” we confirm the exact fob, trim, and prompts before programming. Reviewed for route and safety by Mohammad H. Abdelhadi, ALOA-Certified Master Locksmith.
| Year | Route status | Exact steps |
|---|---|---|
| 2007–2017 | Route verified (tool) | Professional route |
Common questions
What type of key does my 2007-2017 Jeep Compass use?
It uses a remote-head key that combines the metal key blade, transponder chip, and keyless entry buttons in one unit for these model years.
Can I use any Jeep remote with my Compass?
No. The replacement must match the correct FCC ID and be compatible with your Compass year range to program and function properly.
Do 2007-2017 Jeep Compass models use push-button or proximity keys?
No. These years use a traditional keyed ignition with a remote-head key; proximity or push-button start remotes listed for later Compass years are not compatible.
Can you program a Compass key fob without going to the dealership?
For most years, yes - the route is onboard relearn or an OBD tool, both of which a mobile locksmith handles at your location.
Does this program the remote only, or the transponder key too?
It depends on your key type. Tell us your FCC ID and we will confirm.
What if my year says professional programming required?
Those years need a programmer or security access; we bring the tool to you and program it on site.
How much does it cost?
It depends on year, key type, and whether you have a working key. Call (833) 439-8636 for a firm price before we dispatch.