Honda OEM Smart Key Fob (FCC ID KR5BTP) – Specs & Fitment Guide
Operating at 433.92 MHz and housing a 4A transponder chip, the Honda OEM Smart Key Fob (FCC ID KR5BTP) provides proximity-based keyless entry and push-button start functionality for select Honda and Acura platforms. This unit carries the FCC registration ID KR5BTP, which ties it to a specific radio emission profile approved for use in North America. The fob communicates with the vehicle’s body control module over a short-range RF link, while its embedded transponder handles the cryptographic handshake required by the engine immobilizer. Owners who need to source or program the Honda OEM Smart Key Fob (FCC ID KR5BTP) should be aware that this product spans multiple vehicle variants, and confirming exact fitment before purchasing is essential. A correctly enrolled unit will allow seamless passive entry and ignition without removing the key from a pocket or bag.
Honda OEM Smart Key Fob (FCC ID KR5BTP) — Technical Overview
The KR5BTP smart key operates on the 433.92 MHz frequency band, which is the standard carrier for proximity remotes distributed through Honda and Acura dealer channels in the United States and Canada. Inside the housing, a 4A transponder chip manages the rolling-code authentication sequence that the vehicle’s immobilizer system requires before it will permit engine cranking. Because this SKU covers more than one model line, locksmiths and vehicle owners should verify the exact part number printed on the back of the original fob or cross-reference the VIN through Honda’s parts catalog before ordering a replacement.
It is worth noting that while the 4A chip designation and 433.92 MHz frequency are consistent with known documentation for this FCC ID, Honda has been known to revise internal electronics across production runs. Confirming the transponder type with the original key or a diagnostic tool capable of reading the immobilizer protocol is a prudent step before beginning any programming procedure.
Validated Vehicle Fitments
Based on verified data, the following vehicles are compatible with this smart key fob:
- Acura Integra (2022) — The revived Integra nameplate uses a proximity key system that pairs with the KR5BTP remote.
- Acura MDX (2022) — The fourth-generation MDX accepts this fob for both keyless entry and push-button ignition.
- Acura RDX — Certain model years of the RDX utilize the same FCC ID, though owners should confirm the production year against Honda’s parts database.
This device may fit additional Honda or Acura models beyond the list above. Because the KR5BTP designation spans multiple platforms, an automotive locksmith equipped with advanced diagnostics can confirm compatibility by reading the vehicle’s existing key data before enrollment.
Programming Considerations
Enrolling a new proximity remote to any of the compatible Acura models typically requires dealer-level or advanced aftermarket diagnostic equipment. The process involves writing the new fob’s transponder credentials into the vehicle’s immobilizer ECU, a step that cannot be completed with simple on-board key-learning sequences. Locksmiths familiar with Honda and Acura platforms will recognize this as a standard smart-key registration workflow — the tool communicates with the immobilizer module over OBD-II, authenticates with a security code or online session, and then registers the 4A chip embedded in the replacement fob.
For scenarios where every original key has been lost, a PIN or security code retrieval step is generally required before new fobs can be written. This additional layer of authentication protects against unauthorized key registration and is standard across modern Honda and Acura vehicles.
OEM vs. Aftermarket Sourcing
The Honda OEM Smart Key Fob (FCC ID KR5BTP) is available through authorized Honda and Acura parts departments as a genuine factory component. Aftermarket alternatives carrying the same FCC ID do exist; however, the internal transponder quality and RF consistency can vary between manufacturers. For critical applications — especially fleet vehicles or high-value models — sourcing the OEM unit reduces the risk of intermittent communication failures or premature battery drain.
Regardless of sourcing, the fob will still require professional programming to bind with the target vehicle. Purchasing a replacement unit alone does not make it functional; enrollment through a qualified locksmith or dealership technician remains a mandatory step.
Specifications and fitment
| Key type | Smart Key |
|---|---|
| Transponder chip | 4A |
| Frequency (MHz) | 433.92 |
| FCC ID(s) | KR5BTP |
| Region(s) | USA |
| Product type | Smart Key |
| Compatible makes | Acura |
Listed vehicle fitment
| Make | Model | Years |
|---|---|---|
| Acura | Integra | 2022– |
| Acura | MDX | 2022– |
| Acura | RDX |
Fitment must be confirmed against the existing key’s FCC ID family and the vehicle’s exact configuration before cutting or programming. VIN or photo verification may be required.
Questions and answers
Which vehicles does Honda OEM Smart Key Fob (FCC ID KR5BTP) fit?
Honda OEM Smart Key Fob (FCC ID KR5BTP) is listed to fit Acura applications such as Acura Integra, Acura MDX, Acura RDX. Confirm the exact year range and the existing key’s FCC ID family before ordering, since fitment can vary by trim and region.
Does Honda OEM Smart Key Fob (FCC ID KR5BTP) need programming?
Yes. Because it carries a transponder/remote function (chip 4A), it must be programmed (paired) to the vehicle’s immobilizer and, for remote functions, to the keyless-entry system. Many vehicles also require at least one working key to add a new one.
Does the blade need to be cut?
A push-to-start smart key has no traditional blade to cut in normal use, though many include an emergency insert key that can be cut separately.
Is Honda OEM Smart Key Fob (FCC ID KR5BTP) OEM or aftermarket?
This listing is an aftermarket-grade replacement intended to match the original key’s electronic and mechanical specification. It is not required to carry a vehicle-brand logo and should be matched by FCC ID family and chip type rather than by appearance.
Check Fitment and Key Help
Low Rate Locksmith, a mobile automotive locksmith, can confirm whether Honda OEM Smart Key Fob (FCC ID KR5BTP) matches an existing FCC ID family and coordinate cutting and programming when the vehicle configuration requires professional service. For dispatch and support, call (833) 439-8636 or email info@lowratelocksmith.com.
Frequently asked questions
Get help for your vehicle
Share your year + situation and we'll confirm compatibility and a typical price range. Or call the dispatch number directly.
- ✅ Compatibility first
- 🧾 Itemized scope
- 🪪 Authorization required