Here at Low Rate Locksmith we are your source for free instructions on how to program your Honda, keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Honda car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
Introduction to Key Fobs and Remotes:
This invention relates generally to an encryption process for a remote keyless entry system and, more particularly, to an encryption process for a remote keyless entry system that includes a rolling code updating scheme that provides heightened security integrity against unwanted entry.
The Honda remote keyless entry system enables a vehicle operator to perform certain functions, such as lock or unlock a door or trunk of the vehicle, from a remote location are known in the art. Keyless entry systems of this type generally include a portable transmitter carried by the vehicle operator, usually included as part of a fob attached to a key chain for carrying keys of the vehicle. The transmitter will include a button that, upon activation, will cause the transmitter to broadcast a radio frequency signal as a series of coded data bits. If the vehicle is within the operating range of the transmitter, an antenna and receiver associated with the vehicle will receive the coded signal. If the receiver determines the coded signal to be valid, then the receiver will automatically cause the desired function to be performed as encoded on the signal.
Step-By-Step instructions to program 2006-2011 Honda Pilot key fob (Method 1):
Entering programming mode erases all remotes that were programmed.
You must reprogram all remotes you want to work once you have entered
the programming mode.
You must perform each of the first twelve steps within 5 seconds of each
other to enter programming mode. Programming each remote (step 13)
must be done within 10 seconds.
- Make sure the doors are unlocked.
- Turn the ignition to the ON position (II)
- Press the LOCK or UNLOCK button on the remote.
- Turn the ignition to the ACCESSORY (I) or LOCK (0)
- Turn the ignition to ON (II).
- Press the LOCK or UNLOCK button on same remote.
- Turn the ignition to ACCESSORY (I) or LOCK (0).
- Turn the ignition to ON (II).
- Press the LOCK or UNLOCK button on the same remote.
- Turn the ignition to ACCESSORY (I) or LOCK (o).
- Turn the ignition to ON (O).
- Press the LOCK or UNLOCK button on the same remote. Make sure the
door locks cycle to indicate that the system has entered programming
- Press the LOCK button on each remote that you want programmed. Make
sure the doors locks cycle each time to indicate that remote has been
accepted. The system will accept up to three remotes.
- Turn the ignition to LOCK (0) to exit the programming remote.
- Test remotes.
Step-By-Step instructions to program 2006-2011 Honda Pilot key fob (Method 2):
Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
You must close all doors and the rear liftgate/trunk in order for this programming procedure to work.
These instructions will only program a keyless entry remote. If you have the Honda remote/key combo, these instructions will only program the remote portion of the fob. You will still need to get the transponder key programmed to start your vehicle at an Automotive Locksmith.
Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.
Step-by-Step How To Programming Instructions:
- ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
- INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
- PERFORM each of the next three (3) steps in order, then repeat all three (3) steps three (3) more times for a total of four (4) times each.
- TURN the Ignition to the ON position, marked “II” on the Ignition. WAIT for a quiet clicking sound from the vehicle.
- PRESS the LOCK button on the remote for approximately 1 second. (Say “Mississippi”)
- TURN the Ignition to the OFF position, marked “I” on the Ignition. (REPEAT Steps 4-6 three (3) more times)
- During the fourth (4th) cycle of these steps, the door locks should cycle indicating the vehicle has ENTERED Programming Mode.
- Within five (5) seconds of entering Programming Mode, PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
- For programming additional remotes to your vehicle, REPEAT Step 8 with each additional remote one after another. Step 8 must be completed within five (5) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
- TURN the ignition to OFF.
- Test all remotes. Programming is now complete.
- After successful programming, if your remote has a TRUNK RELEASE / REAR LIFTGATE Button — you will need to hold that button down for 5-10 seconds for that function to begin operation.
- If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.