Honda Civic Key Fob Replacement Service
Low Rate Locksmith Can help you with all of your Honda Civic keys needs
We are mobile and we are available 24/7
We have techs available across the United States
Call us Now
24 Hour Service
Fast Response Time
Click on the year of The Honda Civic to get Remote Key Fob Free instructions:
1996 Civic key fob programming instructions
1997 Civic key fob programming instructions
1998 Civic key fob programming instructions
1999 Civic key fob programming instructions
2000 Civic key fob programming instructions
2001 Civic key fob programming instructions
Step-By-Step instructions to program 1996-1998 Honda Civic key fob (Method 1):
- Unlock the doors
- Turn Key to on position. (This is the position where the key sits while you’re driving. The accessories should come on and the dashboard will light-up.)
- Push and hold **valet button on the stock radio. Door locks will cycle one time. (
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
- Press any button on remote one time within 20 seconds. Door locks will cycle again.
- To program up to 4 additional remotes repeat step 3 for each additional remote.
- Turn key off programming is complete.
Step-By-Step instructions to program 1996-1998 Honda Civic key fob (Method 2):
- TURN Ignition to the ON (II) position. (ON is the position just shy of starting the vehicle without cranking the engine.)
- PRESS and HOLD the Valet/Disarm Button located between the AM/FM and CD/TAPE Buttons. The vehicle will respond by cycling the door locks, indicating the vehicle is now in Programming Mode. (Continue to hold the Valet/Disarm Button until instructed to release.)
- Within five (5) seconds, PRESS the LOCK or UNLOCK Button on the remote. The vehicle will respond by cycling the door locks, indicating successful programming of that remote.
- Within ten (10) seconds, REPEAT Step 3 to program any additional remotes.
- RELEASE the Valet/Disarm Button to EXIT Programming Mode.
- Test all remotes. Programming is now complete.
- If these programming instructions helped you save time and money, please consider sharing our website with friends and family so they can do the same.
Where Can I buy 1996-1998 Honda Civic Key Fob/ Remote for Cheap?
Low Rate Locksmith Sells these kind of key fobs. Find your Below.
2002 Civic key fob programming instructions
2003 Civic key fob programming instructions
2004 Civic key fob programming instructions
2005 Civic key fob programming instructions
2006 Civic key fob programming instructions
2007 Civic key fob programming instructions
Step-By-Step instructions to program 1999-2005 Honda Civic key fob (Method 1):
- Make sure the doors are unlocked.
- Turn the ignition to the ON position (II)
- Press the LOCK or UNLOCK button on the remote.
- Turn the ignition to the ACCESSORY (I) or LOCK (0)
- Turn the ignition to ON (II).
- Press the LOCK or UNLOCK button on same remote.
- Turn the ignition to ACCESSORY (I) or LOCK (0).
- Turn the ignition to ON (II).
- Press the LOCK or UNLOCK button on the same remote.
- Turn the ignition to ACCESSORY (I) or LOCK (o).
- Turn the ignition to ON (O).
- Press the LOCK or UNLOCK button on the same remote. Make sure the door locks cycle to indicate that the system has entered programmingmode.
- Press the LOCK button on each remote that you want programmed. Make sure the doors locks cycle each time to indicate that remote has beenaccepted. The system will accept up to three remotes.
- Turn the ignition to LOCK (0) to exit the programming remote.
- Test remotes.
Step-By-Step instructions to program 1999-2005 Honda Civic key fob (Method 2):
- ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
- INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
- PERFORM each of the next three (3) steps in order, then repeat all three (3) steps two (2) more times for a total of three (3) times each.
- TURN the Ignition to the ON position, marked “II” on the Ignition.
- PRESS the LOCK button on the remote for approximately 1 second. (Say “Mississippi”)
- TURN the Ignition to the OFF position, marked “I” on the Ignition. (REPEAT Steps 4-6 three (3) times)
- TURN the Ignition switch to the ON position, marked “II” on the Ignition.
- PRESS the LOCK button on the same remote. The door locks should cycle indicating the vehicle has ENTERED Programming Mode.
- PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
- For programming additional remotes to your vehicle, REPEAT Step 9 with each additional remote one after another. Step 9 must be completed within ten (10) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
- TURN the ignition to OFF.
- Test all remotes. Programming is now complete.
- After successful programming, if your remote has a TRUNK RELEASE Button — you will need to hold that button down for 5-10 seconds for that function to begin operation.
- If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
2008 Civic key fob programming instructions
2009 Civic key fob programming instructions
2010 Civic key fob programming instructions
2011 Civic key fob programming instructions
2012 Civic key fob programming instructions
2013 Civic key fob programming instructions
Step-By-Step instructions to program 2006-2013 Honda Civic key fob (Method 1)
- ENTER the vehicle and CLOSE all doors. (Each of the following steps must be completed within five seconds of one another. If you take longer than five seconds between steps or make a mistake, you must start the entire procedure over.)
- INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.
- PERFORM each of the next three (3) steps in order, then repeat all three (3) steps two (2) more times for a total of three (3) times each.
- TURN the Ignition to the ON position, marked “II” on the Ignition.
- PRESS the LOCK button on the remote for approximately 1 second. (Say “Mississippi”)
- TURN the Ignition to the OFF position, marked “I” on the Ignition. (REPEAT Steps 4-6 three (3) times)
- TURN the Ignition switch to the ON position, marked “II” on the Ignition.
- PRESS the LOCK button on the same remote. The door locks should cycle indicating the vehicle has ENTERED Programming Mode.
- PRESS the LOCK button again on the same remote. The door locks should cycle again indicating the vehicle has successfully PROGRAMMED that remote.
- For programming additional remotes to your vehicle, REPEAT Step 9 with each additional remote one after another. Step 9 must be completed within ten (10) seconds for each additional remote. You may program up to three (3) remotes to your vehicle.
- TURN the ignition to OFF.
- Test all remotes. Programming is now complete.
- After successful programming, if your remote has a TRUNK RELEASE Button — you will need to hold that button down for 5-10 seconds for that function to begin operation.
- If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Where Can I buy 2006-2013 Honda Civic Key Fob/ Remote for Cheap?
Low Rate Locksmith Sells these kind of key fobs – Call Us!
Key Fob Programming FAQ:
Q: What does it cost to have a Honda Civic fob programmed?
At the dealership, the cost of replacing an electronic fob can range from $50-$90, depending on the automaker or complexity of the design. All fobs need to be programmed. Some dealerships will do it for free, while others will charge a half hour to an hour of labor.
With Low Rate Honda Locksmith you can program your key fob by yourself for free!
Q: How do you program a key fob?
You find the instructions here are Low Rate Honda Civic Locksmith Key Fob Programming Sections.
Q: Can you program a key fob at home?
You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle.
Q: I lost the key Fob and the key to my 2008 Honda Civic, what should I do?
Don’t panic. Low Rate Locksmith can help you to replace 2008 Honda Civic Key Lost and remote.
Q: What Honda Civic Models will these instructions work for?
It will work for the following models:
DX
EX
EX Special Edition
Hybrid
LX
LX Special Edition
Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Honda keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Chevrolet car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
