Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your GMC keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your GMC car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

Here is the list of GMC Acadia Years and models this supports:

  • 2007 GMC Acadia
  • 2008 GMC Acadia
  • 2009 GMC Acadia

 

2007-2009 GMC Acadia Car Fob and Remote Programming Instructions:

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVE displays

4.  Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.

On vehicles with memory recall seats, the first remote learned will match Driver 1
and the second will match Driver 2.

5. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.

6. To exit programming mode turn key off and remove key.
Test remote(s).

If you have any questions or need a professional Locksmith To assist you with your GMC Acadia Key Fab Programming, below is a list of Low Rate GMC Locksmith Locations.

The GMC Acadia is a full-size crossover SUV from GM. The GMC Acadia, Chevrolet Traverse and Buick Enclave share the new GM Lambda platform. The Acadia went on sale in the United States in December 2006, and in Canada in January, 2007. A Denali version of the Acadia debuted in 2010 as a 2011 model.

It is GMC’s first front-wheel drive passenger vehicle and GMC’s first crossover SUV. The Acadia features seating for eight, generous interior space, and either front or all-wheel drive.

A unibody construction helps lower center of gravity, compared to previous truck-based GM SUVs, reduces the risk of rollover accidents.

Rate our post