Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Nissan keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Nissan Locksmith offers detailed step-by-step directions from the manufacturer of your Nissan car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

Here is the list of Nissan Murano Years and models this supports:

  • 2003 Nissan Murano
  • 2004 Nissan Murano
  • 2005 Nissan Murano
  • 2006 Nissan Murano
  • 2007 Nissan Murano
  • 2008 Nissan Murano

 

2003-2004 Nissan Murano Fob and Remote Programming Instructions:

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

Nissan Murano key replacement

2005-2008 Nissan Murano  Fob and Remote Programming Instructions:

If you have a separate Key and Remote use the procedure below.

 

If you have a Remote Key Combo (Remote in the head of your key). There is no manual way to program keyless remotes to this vehicle. Please contact a Locksmith or your local dealership to get a quote on how much it will cost to program keyless remotes to this vehicle.

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

 

The Nissan Murano is a mid-size crossover SUV first sold by Nissan in December 2002 as a 2003 model. Nissan introduced the Murano as its first crossover SUV for the United States and Canada. The SUV is named after Murano, Italy.

A convertible version called Cross Cabriolet was added for the 2011 model year, premiering at the 2010 Los Angeles International Auto Show. However, due to slow sales and lack of promotion, Nissan announced on April 15, 2014, that it will end production on the Cross Cabriolet and there are no plans to replace it with another vehicle.

The Murano was nominated for the North American Truck of the Year award for 2003. It was also named the best premium mid-size SUV by Auto Pacific. For 2010, the Murano received the highest ratings in the front-, side-, and rear-impact evaluations performed by the Insurance Institute for Highway Safety