Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Nissan keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Nissan car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

Here is the list of Nissan Sentra key replacement Years and models this supports:

 

  • 1995 Nissan Sentra
  • 1996 Nissan Sentra
  • 1997 Nissan Sentra
  • 1998 Nissan Sentra
  • 1999 Nissan Sentra
  • 2000 Nissan Sentra
  • 2001 Nissan Sentra

 

  • 2002 Nissan Sentra
  • 2003 Nissan Sentra
  • 2004 Nissan Sentra
  • 2005 Nissan Sentra
  • 2006 Nissan Sentra
  • 2007 Nissan Sentra
  • 2008 Nissan Sentra
  • 2009 Nissan Sentra

 

1995-1999 Nissan Sentra Fob and Remote Programming Instructions:

1. Enter vehicle, close and lock all doors using power lock switch on drivers door.

2. Insert and remove (do not turn) key from ignition at least 6 times within 10 seconds.
Tail lamps will flash to indicate original code has been erased.

3. Insert and turn key to ACC position.

4. Press LOCK on first keyless remote. Tail lamps will flash to confirm programming.

5. To add additional remotes, unlock then lock the doors using power lock
switch on drivers door.

6. Press LOCK button on second keyless remote. Tail lamps will flash to confirm
programming.

7. Open drivers door, turn ignition to OFF..

2000-2006 Nissan Sentra Fob and Remote Programming Instructions:

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

If you have a separate Key and Remote use the procedure below.

If you have a Remote Key Combo. There is no manual way to program keyless remotes to this vehicle. Please contact a Locksmith or your local dealership to get a quote on how much it will cost to program keyless remotes to this vehicle.

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

The Nissan Sentra is a compact car produced by automaker Nissan Motors and key replacement and is generally a rebadged export version of the Japanese Nissan Sunny. The “Nissan Sentra” nameplate is not used in Japan. In Mexico, the first three generations of the Sentra were known as the Tsuru (Japanese for crane), and the 1994 model is still sold under that name, having gone through three model changes, alongside the current Sentra.

Nissan launched in August 2009 in Brazil a FFV variant of the B16 Sentra. It features the same MR20DE engine, but capable of running on hydrated ethanol (E100) or a blend of gasoline with 20 to 25 percent of anhydrous ethanol (mandatory blend since 1993) or a mix of both in any proportion.

Regarding the safety of the first generation model, it was ranked the seventh safest car in a rank made by the Center for Auto Safety in 1983, which examined the National Highway Traffic Safety Administration (NHTSA) testing, consisting of frontal crashes at 35 miles per hour.