Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Nissan keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Nissan car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

Here is the list of Nissan Versa Years and models this supports:

  • 2009 Nissan Versa

 

2009 Nissan Versa Fob and Remote Programming Instructions:

These instructions are for the Keyless Remote not the Nissan Proximity  Key.
If you have the Proximity Key Remote you will need to have a Locksmith
or Dealership program it for you.

IMPORTANT: Before entering programming mode, have in possession all of the transmitters
you will be using on the vehicle. Once you program the transmitter, all previous codes will
be erased from the memory. The other transmitters will not be functional until you program
the transmitters again.

1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times
within 10 seconds. Your Hazard Lamps will flash if you have performed this step
successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this
procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should
flash. NOTE: Do not press the button more than one time in the above step. If the button
is pressed more than one time, the programming procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors
using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button
on the next remote. Your Hazard Lamps should flash. Repeat this step for each
transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the
driver’s side power lock/unlock switch and open the driver side door.

 

The Nissan Tiida is a compact car produced by Japanese manufacturer Nissan since 2004.  It is also marketed as the Nissan Versa, prominently in the United States, and as the Dodge Trazo in parts of South America. According to a Nissan press release in 2008, “versa” is short for “versatile space” meant to imply the spaciousness of the interior and configurable cargo arrangements.

The Versa was introduced in the United States and Canada in July 2006 as a 2007 model. The hatchback model was introduced first, with the sedan arriving later at the end of the year, both as 2007 models. Introduced for the 2009 model year in sedan form only, the Versa 1.6 uses a smaller, 1.6-liter (HR16DE) Inline 4 gasoline engine.

 

5/5 - (12 votes)