Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Ford keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Ford car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.
2004-2007 Ford Freestar Remote Programming Instructions:
1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in
RUN. Door locks will cycle to confirm programming mode.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle
to confirm programming.
3. Within 20 seconds, press any button on second keyless remote. Door locks will
cycle again to confirm programming.
4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
If you have any questions or need a professional Locksmith To assist you with your Ford Freestar Key Fab Programming, below is a list of Low Rate Locksmith Locations.
For the 2004 model year, the Ford locksmith Windstar was redesigned inside and out. As part of a controversial company initiative to rebrand its vehicles with nameplates starting with the letter F, the Windstar name was replaced by Ford Freestar. Ford discontinued the Freestar after the 2007 model year. All models of the Ford Freestar were on-board programmable, meaning a person could program the keyless entry remote fob smart key with no special equipment other than the keyless entry remote fob smart key programming instructions.