Here at Low Rate Automotive Locksmith we are your source for free instructions on how to program your Ford keyless entry remote control and all other kinds of vehicles, both foreign and domestic. Whether you drive a car, a truck, or an SUV we have the information you need to program your remote. Low Rate Locksmith offers detailed step-by-step directions from the manufacturer of your Ford car or truck, detailing how to program the key fob remote control, or programmable key for your vehicle. If you have lost a key, replaced a defective key-less entry remote, or added a new key, we have the instructions that you need to make the remote control work for your car, truck, van, or sport utility vehicle. Please select your Year from the menu below.

 

2006-2020 Ford Fusion Remote Programming Instructions:

You must have two previously programmed keys and the new unprogrammed key readily accessible. If you do not have two previously programmed keys you will need a Locksmith to cut and program a second key.

1. Insert the first previously programmed key into the ignition.2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.

3. Switch the ignition off and remove the first programmed key from the ignition.

4. After three seconds but within 10 seconds of switching the ignition off, insert the second previously programmed key into the ignition.

5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.6. Switch the ignition off and remove the second previously programmed key from the ignition.

7. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.8. Switch the ignition from off to on. Keep the ignition on for at least six seconds.

9. Remove the newly programmed key from the ignition. If the key has been successfully
programmed it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If it was not programmed successfully, wait 10 seconds and repeat Steps 1 through 8.

If you have any questions or need a professional Locksmith To assist you with replacing Ford Fusion Key Fab Programming, below is a list of Low Rate Locksmith Locations.

 

The Ford Fusion is a mid-size car produced by the Ford Motor Company since the 2006 model year.  As of 2018, all models of the Ford Fusion were on-board programmable, meaning a person could program the keyless entry remote fob smart key with no special equipment other than the keyless entry remote fob smart key programming instructions.  However, most Ford Fusion’s will require that you have 2 keyless entry remote fob smart keys in order to program a new keyless entry remote fob smart key.
Rate our post